Xerox 3124 Using SetIP Phaser 3125/N only, Installing SetIP, cannot find your printer name, click

2 Using SetIP (Phaser 3125/N only)

Installing SetIP

1Make sure that the printer is connected to your computer and powered on.

2Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

3Click Install SetIP Utility(Optional).

4Click Next.

5Click Next.

6Click Finish.

Using SetIP

1From the Windows Start menu, select Programs or All Programs Æ Xerox Phaser 3125 Æ SetIP Æ SetIP.

The program automatically detects and displays new and configured print servers on your network.

2 Select the name of your printer and click	. If you
cannot find your printer name, click	to refresh
the list.

NOTES:

•To confirm the MAC address, see the NETWORK PRINTER CARD TEST PAGE. The NETWORK PRINTER CARD TEST PAGE will be printed after the Configuration Page.

•The refreshed list doesn’t show your printer, click enter your network printer card’s MAC address, IP address, subnet mask, default gateway, and then click Apply.

3Click OK to confirm the settings.

4Click Exit to close the SetIP program.

12

Using SetIP (Phaser 3125/N only)