Xerox 3124 manual Network setupPhaser 3125/N only, Introduction, Supported operating systems

4 Network setup(Phaser 3125/N only)

This chapter gives you basic information for setting up your printer for network connections.

This chapter includes:

•Introduction

•Supported operating systems

Introduction

Once you have connected your printer to a network with an RJ-45 Ethernet cable, you can share the printer with other network users.

You need to set up the network protocols on the printer to use it as your network printer.

Supported operating systems

The following table shows the network environments supported by the printer:

Item		Requirements
Network interface	•	10/100 Base-TX
Network operating	•	Windows 98/Me/NT 4.0/2000/XP(32/64 bit)/
system		2003
	•	Linux OS including Red Hat 8 ~ 9,
		Fedora Core 1 ~ 3, Mandrake 9.2 ~ 10.1,
		SuSE 8.2 ~ 9.2
	•	Mac OS 8.6 ~ 9.2, 10.1 ~ 10.4
	•	Unix HP-UX, Solaris, SunOS, SCO UNIX
Network protocols	•	TCP/IP
	•	EtherTalk
	• HTTP 1.1
	• SNMPv2
Dynamic	• DHCP, BOOTP
addressing server

•TCP/IP: Transmission Control Protocol/Internet Protocol

•DHCP: Dynamic Host Configuration Protocol

•BOOTP: Bootstrap Protocol

4.1 <Network setup(Phaser 3125/N only)>