–The power cord is damaged or frayed.
–A wall panel circuit breaker, fuse, or other safety device has been tripped.
–Liquid is spilled into the copier/printer.
–The equipment is exposed to water.
–Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all times.
Do These:
•Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician.
•This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will fit only into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.
•Always follow all warnings and instructions that are marked on or supplied with the equipment.
•Always exercise care when moving or relocating equipment. Please contact your local Xerox Service Department, or your local support organization to arrange relocation of the product to a location outside of your building.
•Always locate the equipment in an area that has adequate ventilation, and the room for servicing. See install guide for minimum dimensions
•Always use materials and supplies specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance.
•Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
•Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.
•Never attempt any maintenance function that is not specifically described in this documentation.
•This equipment should not be placed in a
•Never remove covers or guards that are fastened with screws. There are no operator serviceable areas within these covers.
•Never locate the equipment near a radiator or any other heat source.
•Never push objects of any kind into the ventilation openings.
•Never override or "cheat" any of the electrical or mechanical interlock devices.
•Never operate the equipment if you notice unusual noises or odors. Disconnect the power cord from the electrical outlet and contact your local Xerox Service Representative or Service Provider immediately.
Maintenance Information
Do not attempt any maintenance procedure that is not specifically described in the documentation that is supplied with your copier/ printer.
•Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor performance of the equipment, and could create a dangerous condition.
•Use supplies and cleaning materials only as directed in this manual. Keep all of these materials out of the reach of children.
•Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service.
•Do not perform any maintenance procedures unless you have been trained to do them by an authorized local dealer or unless a procedure is specifically described in the user manuals.
Ozone Safety Information
This product will produce ozone during normal operation. The ozone produced is heavier than air and is dependent on copy volume. Providing the correct environmental parameters as specified in the Xerox installation procedure will ensure that the concentration levels meet safe limits.
ii
