Vulcan-Hart BVD36FP52(F,L)N-1, BVP42FP52(F,L)N-1, BVD34FP50(F,L)N-1 Important Safety Information

Models: BVD34FP30(F,L)N-1 BVD36FP32(F,L)N-1 BVD36FP52(F,L)N-1 BVP42FP32(F,L)N-1 BVD34FP50(F,L)N-1 BVP42FP52(F,L)N-1

1 40
Download 40 pages 38.56 Kb
Page 3
Image 3
IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

Before enclosing the vent pipe assembly, operate the appliance to ensure it is venting properly.

If this appliance is installed directly on carpeting,

Clothing or other flammable material should not be

 

tile or other combustible material other than wood

 

placed on or near the appliance.

 

flooring the appliance shall be installed on a metal or

Adequate accessibility clearances for servicing and

 

wood panel extending the full width and depth of the

 

 

proper operation.

 

appliance.

 

 

This appliance must not share or be connected to a

 

The base referred to above does not mean the fireproof

 

 

flue serving a separate solid-fuel burning appliance.

 

base as used on wood stoves. The protection is for rugs

 

 

Keep the area around your appliance clear of

 

that are extremely thick and light colored tile.

Children and adults should be alerted to the hazards

 

combustible materials, gasoline and other flammable

 

vapor and liquids.

 

of high surface temperatures and should stay away

 

 

Under no circumstances should any solid fuels

 

to avoid burns or clothing ignition.

Young children should be carefully supervised when

 

(wood, coal, paper or cardboard etc.) be used in this

 

appliance.

 

they are in the same room as the appliance.

 

 

 

 

• The flow of combustion and ventilation air must not be obstructed in any way.

Due to high temperatures the appliance should be located out of traffic and away from furniture and draperies.

Any part removed for servicing the appliance must be replaced prior to operating the appliance. Work should be done by a qualified service person.

Keep burner and control compartment clean.

Vent cap is hot while fireplace is in operation.

Installation and repair should be done by a QUALIFIED SERVICE PERSON. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding materials, etc. It is imperative that control compartments, burners and circulating air passageways of the appliance be kept clean.

DO NOT put anything around the fireplace that will obstruct the flow of ventilation air.

Clearance in accordance with local installation codes and the requirements of the gas supplier.

DO keep the appliance area clear and free from combustiblematerial,gasolineandotherflammable vapors and liquids.

DO examine venting system periodically and replace damaged parts.

DO make a periodic visual check of pilot and burners. Clean and replace damaged parts.

DO NOT use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Any safety screen or guard removed for servicing an appliance must be replaced prior to operating the appliance.

19400-3-0406

Page 3

Page 3
Image 3
Vulcan-Hart BVD36FP52(F,L)N-1, BVP42FP52(F,L)N-1, BVD34FP50(F,L)N-1, BVP42FP32(F,L)N-1 Important Safety Information