3.Open broiler door and remove broiler pan. The gas pressure regulator is located in the back right hand corner of the broiler compartment.
A
3.Remove Natural gas orifice spuds using a 7 mm combination wrench.
4.Install LP gas orifice spuds using a 7 mm combination wrench.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
4.Remove the cap from the gas pressure regulator using a
NOTE: Do not remove the spring beneath the cap.
A
A.Cap
5.Turn the cap over so the LP is visible.
A
A. Cap
6.Reinstall the cap.
To Convert Surface Burners
1.Remove burner grate, burner caps and burners.
A
B
A. Burner cap
B.Burner
2.Locate LP gas orifice spuds for top burners in the literature bag included with the range. Two LP gas spuds are stamped “88” and two “78.”
A
B
A.Spud
B.Holder
NOTE: This range cooktop is equipped with 2 standard burners and 2 super burners. Spud size and location remain the same.
Standard | Super |
Burner 78 | Burner 88 |
Super | Standard |
Burner 88 | Burner 78 |
5.Place the Natural gas orifice spuds in the parts bag for future use and keep with the bag containing literature.
6.Reinstall burners, burner caps and burner grates.
13
