Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
Fresh fish or shellfish | use same day as purchased | |
Chicken, ground beef, variety meats (liver) | ...................... | |
Cold cuts, steaks/roasts | ||
Cured meats |
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.
4.Insert cover support (with the long tab toward the front) into the groove on the underside of the cover.
NOTE: If the support needs adjustment, turn the base of the support clockwise to raise or counterclockwise to lower.
Crisper
(on some models)
Crisper Drawers
To remove and replace the crisper drawer:
1.Slide the crisper drawer straight out to the stop. Lift the front and slide the drawer out the rest of the way.
2.Replace the drawer by sliding the drawer in fully past the stop.
Crisper Cover
Style 1 - Plastic Cover
To remove and replace the crisper cover:
1.Remove the crisper(s).
Style 2 - Glass Cover
To remove and replace the crisper cover:
1.Pull the glass straight out.
2.Replace the glass by pushing it straight in.
Utility or Egg Bin
(on some models)
Depending on your model, you may have a one, two or three piece bin. Eggs may be stored in the egg tray or loose in the bin.
NOTE: Store eggs in a covered container for
2.Lift the front of the cover to remove the cover support. Then lift the cover up and slide it out.
3.Replace the cover by fitting the cover tabs into lowest cabinet slots and pushing them in. Lower the front retainers into place.
FREEZER FEATURES
Your model may have some or all of these features.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small,
Freezer Shelf
(on some models)
To remove and replace the freezer shelf:
1.Remove items from the shelf.
2.Lift back of shelf over stop and slide shelf straight out.
3.Replace the shelf by sliding the back of the shelf into the tracks on walls of cabinet.
9