Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149 - latest edition.

IMPORTANT: Leak testing of the range must be conducted according to the manufacturers instructions.

Type of Gas

Natural gas:

This range is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

This range is factory set for use with Natural gas. See “Gas Conversions” section. The model/serial rating plate located behind the control panel has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP gas conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. See “Gas Conversions” section.

Gas Supply Line

Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. With LP gas, piping or tubing size can be ½" (1.3 cm) minimum. Usually, LP gas suppliers determine the size and materials used in the system.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape.

Flexible metal appliance connector:

If local codes permit, a new CSA design-certified, 4 to 5 ft (122 to 152.4 cm) long, ½" (1.3 cm) or

¾" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line.

A ½" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance pressure regulator.

Do not kink or damage the flexible metal tubing when moving the range.

Must include a shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the range opening, such as an adjacent cabinet. It should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the range.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To range

Gas Pressure Regulator

The gas pressure regulator supplied with this range must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural gas:

Minimum pressure: 5" WCP

Maximum pressure: 14" WCP

LP gas:

Minimum pressure: 11" WCP

Maximum pressure: 14" WCP

Contact local gas supplier if you are not sure about the inlet pressure.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

6

Page 6
Image 6
Whirlpool W10526071A Gas Supply Requirements, Type of Gas, Gas Supply Line, Gas Pressure Regulator

W10526071A specifications

The Whirlpool W10526071A is a highly innovative appliance designed to enhance your cooking experience while providing exceptional versatility and functionality. As a part of Whirlpool’s commitment to creating smarter and more efficient kitchen solutions, this product integrates advanced technologies that cater to the needs of modern households.

One of the standout features of the W10526071A is its spacious design, which allows ample room for cooking various dishes simultaneously. This appliance is equipped with multiple cooking modes, including baking, broiling, and warming, ensuring that users can choose the best method for their culinary needs. Its user-friendly interface is intuitively designed, allowing for easy navigation between settings and functions so that even novice cooks can maximize their potential.

The W10526071A boasts advanced temperature management technology, ensuring consistent heat distribution throughout the cooking space. This feature helps to eliminate hot spots, resulting in evenly cooked meals every time. Additionally, the appliance includes a built-in timer and automatic shut-off feature, providing peace of mind for busy cooks who may step away from the kitchen.

Ease of cleaning is another critical aspect of the Whirlpool W10526071A. The interior surfaces are coated with a non-stick finish, which simplifies the cleaning process and ensures that spillages and splatters do not become a hassle. A removable crumb tray further enhances convenience, allowing for easy disposal of mess without needing to disassemble the unit.

Furthermore, this appliance has been designed with energy efficiency in mind. It utilizes advanced insulation technology to minimize heat loss, leading to lower energy consumption. This characteristic not only reduces utility bills but also contributes to a more environmentally friendly kitchen.

Whirlpool is renowned for its durability and reliability, and the W10526071A continues that legacy. Constructed from high-quality materials, this appliance is built to withstand the rigors of daily use, ensuring a long lifespan and dependable performance.

In summary, the Whirlpool W10526071A combines innovative features, advanced technologies, and user-centric design to create a powerful kitchen appliance. Its spacious cooking capacity, precise temperature management, ease of cleaning, and energy efficiency make it an excellent addition for any home chef looking to elevate their culinary creations. With Whirlpool, cooking becomes not just a necessity, but a delightful experience.