Whirlpool W10533016A installation instructions Level Range, Installing/Replacing the Battery

Level Range

1.Place a standard flat rack in oven.

2.Place level on the rack and check levelness of the range, first side to side; then front to back.

3.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket.

4.Use a ³⁄₈" drive ratchet and slip-joint pliers to adjust leveling legs up or down until the range is level.

5.Push range back into position.

6.Check that rear leveling leg is engaged in the anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance.

Installing/Replacing the Battery

A

A. Battery holder location

10

A

B

C

D

A.Screw

B.Metal battery top*

C.Plastic battery box

D.Battery holder

*NOTE: Metal battery top is included in the bag containing the literature.

To install or replace the 9V DC alkaline battery, follow the steps below.

1.Open the broiler door.

2.Remove broiler pan and grill from broiler.

3.Using a Phillips screwdriver, remove the metal battery top from the bottom of the range and open the plastic battery box.