4.Remove the cap from the gas pressure regulator using a
A
A.Cap
5.Turn the cap over so “LP” is visible.
A
A. Cap
6.Reinstall the cap.
To Convert Surface Burners
1.Remove burner grate, burner caps and burners.
A
B
A. Burner cap
B.Burner
2.Locate LP gas orifice spuds for top burners in the literature bag included with the range. Three LP gas spuds are stamped “88” and one “96.”
3.Remove Natural gas orifice spuds using a 7 mm combination wrench.
4.Install LP gas orifice spuds using a 7 mm combination wrench.
A
B
A.Spud
B.Holder
NOTE: Depending on model, the range cooktop may be equipped with 4 standard burners or 3 standard burners and 1 super burner. Spud size and location remain the same.
For models with 4 standard burners:
Std burner 88 | Std burner 88 |
Std burner 88 | Std burner 88 |
For models with 3 standard burners and 1 super burner:
Std burner 88 | Std burner 88 |
Super burner 96 | Std burner 88 |
5.Place the Natural gas orifice spuds in the parts bag for future use and keep with the bag containing literature.
6.Reinstall burners, burner caps and burner grates.
15
