Temperature and Moisture

Temperature is too warm

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

Large load of food added? Allow several hours for refrigerator to return to normal temperature.

Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

Humid room? Contributes to moisture buildup.

Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely,” earlier in this section.

Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

Water shutoff valve not fully open? Turn the water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

Odor transfer from food? Use airtight, moisture proof packaging to store food.

Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

The water dispenser will not operate properly

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? Straighten the water source line.

New installation? Flush and fill the water system. See “Water Dispenser.”

Is the water pressure at least 35 psi (241 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

Water filter installed on the refrigerator? Remove filter and operate dispenser. If water flow increases, the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely,” earlier in this section.

Recently removed the doors? Make sure the water dispenser wire/tube assembly has been properly reconnected. See “Refrigerator Doors.”

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

20

Page 20
Image 20
Whirlpool W10551728A installation instructions Temperature and Moisture, Ice and Water, Temperature is too warm

W10551728A specifications

The Whirlpool W10551728A is a versatile and powerful appliance designed to meet the demands of modern households. This refrigerator model stands out due to its exceptional blend of innovation, efficiency, and style, offering consumers a dependable solution for food storage.

One of the main features of the W10551728A is its spacious interior, which offers ample storage options to accommodate a variety of food items. The refrigerator is designed with adjustable shelving, allowing users to customize the layout to suit their storage needs. This flexibility ensures that both large and small items can be easily organized and accessed.

In terms of technologies, the Whirlpool W10551728A incorporates adaptive cooling features that help maintain optimal temperatures, ensuring longer freshness for perishable goods. The refrigerator includes a temperature management system that automatically adjusts the internal climate based on the contents it holds. This not only enhances food preservation but also improves energy efficiency.

The Energy Star certification of the W10551728A underscores its eco-friendly design, making it a great choice for environmentally conscious consumers. The appliance is engineered to minimize energy consumption without compromising performance, thus saving on utility bills while contributing to a reduction in carbon footprint.

Another notable characteristic of the Whirlpool W10551728A is its user-friendly interface, which includes intuitive controls for adjusting temperature settings and activating special features. The sleek design is complemented by an exterior that is both stylish and easy to clean, helping the appliance blend seamlessly into any kitchen décor.

Additionally, the refrigerator features humidity-controlled crisper drawers designed to keep fruits and vegetables fresher for longer. By regulating humidity, these drawers prevent moisture loss, extending the shelf life of produce.

The Whirlpool W10551728A also boasts a reliable warranty, providing consumers peace of mind regarding the durability and longevity of their investment. With its combination of functionality, efficiency, and modern aesthetics, the W10551728A stands as an excellent choice for families seeking a robust and dependable refrigerator. Whether for storing groceries, preparing meals, or entertaining guests, this appliance ensures that your kitchen remains organized and efficient.