Gas DryerPRODUCT MODEL NUMBERS
W10443045B
02/2012
WGD9050X, WGD9150W, WGD9151X, WGD9250W,
WGD9270X, WGD9051Y, WGD9151Y, WGD9371Y
NOTE: Most installations require a minimum
5" (102 mm) clearance behind the dryer for
the exhaust vent with elbow. See “Venting
Requirements”.
Side view:DRYER DIMENSIONS
Front view:27"
(686 mm)
1"
(25 mm)
353/8"
(899 mm)
31/2"
(89 mm)
29"
(736 mm)
Left or
right side
exhaust
67/8"
(174 mm)
15/8"
(41 mm)
471/8"
(1197 mm)
481/8"
(1238 mm)
Door open view:Back view: Closet Installation (stacked washer and dryer): Closet installation (dryer only):61/4"
(159 mm)281/8"(715 mm)31/2"(89 mm)14"(358 mm)Electric24 in.2
(155 cm2)
48 in.2
(310 cm2)
1"
(25 mm)
1"
(25 mm)
4"
(102 mm)
3"
(76 mm)
34" recommended
(864 mm)
18" min.
(457 mm)
3"
(76 mm)
Custom under counter installation (dryer only):
1"
(25 mm)
1"
(25 mm)
39" min.
(990 mm)
Spacing for recessed area or closet
installation
All dimensions show recommended spacing
allowed, with tested spacing of 0" (0 mm)
clearance on sides and rear.
■Additional spacing should be considered
for ease of installation and servicing.
■Additional clearances might be required
for wall, door, and oor moldings.
■Additional spacing should be considered
on all sides of the dryer to reduce noise
transfer.
■For closet installation, with a door,
minimum ventilation openings in the top
and bottom of the door are required.
Louvered doors with equivalent
ventilitation openings are acceptable.
■Companion appliance spacing should
also be considered.
■No other fuel-burning appliance may be
installed in the same
closet as the dryer.
NOTE: Some models not recommended for
undercounter installation.
1"(25 mm)1"(25 mm)51/2"(140 mm)24 in.2
(155 cm2)48 in.2
(310 cm2)3"(76 mm)3"(76 mm)6"(152 mm)71"(1803 mm)