To check dispenser
Remove dispenser cap. If dispenser is empty, an “E”will be clearly visible inside the dispenser.
The center of the Fill Indicator cap will be clear when dispenser needs refilling.
“E” shows when empty
Center will ba clear when
mPty
To fill dispenser
You do not have to wait until the dispenser is empty to refill it, but do not overfill it. The dispenser will hoM 6 ounces (175 mL) of rinse agent. Under normal conditions, this will last about 3 months.
1.Make sure the dishwasher door is fully open.
2.Remove the Fill Indicator cap.
3.Add rinse agent to the dispenser. Do not fill past the smallest opening in the lower part of the dispenser.
lf you overfill, excess rinse agent can come out. This will not harm the dish- washer, but coukf cause
4.Clean up any spilled rinse agent with a damp cloth.
5.Replace the Fill Indicator cap and keep it tightly closed.
NOTE: Your dishwasher is designed to use a liquid rinse agent. You do not need to use a solid or
Keep rinse agent dispenser tilted for best drying resuks
Do not fill past w smallest opening
Quiet operating tips
To avoid thumping and clattering noises during operation:
l Make sure lightweight bad items are secured in the racks.
l Make sure pot lids and handles, pizza pans, cookie sheets, etc. do not touch interior walls or interfere with the spray arm’s rotation or cover the spray tower.
l Load dishes so they do not touch one another.
NOTE: Keep sink drain plugs inserted during dishwasher operation to prevent noise transfer through drains.
12
