ASSEMBLY
ASSEMBLY
DISCHARGE CHUTE INSTALLATION
DANGER Keep away. To avoid serious injury or death from thrown objects or blade contact, never operate mower without discharge chute in place.
Attach discharge chute (1) to mower platform using four 3/8" x 3/4" bolts (2) and 3/4" locknuts (3) as shown.
FIGURE 5.
3
1
FIGURE 5
Discharge Chute Installation
2
DRIVELINE ATTACHMENT - To Gearbox
1.Insert yoke onto splined shaft. Twist red collar on end yoke.
2.Slide yoke (with collar twisted) onto gearbox shaft.
3.Move yoke back and forth until collar clicks and locks the yoke in place.
WHIRLWIND 08/01 | Assembly Section |
© 2004 Alamo Group Inc. |
|
