Manuals / Whistler / Computer Equipment / Power Supply

Whistler 2000, 1000 owner manual Operation

Models: 2000 1000

1 18
Download 18 pages 4.51 Kb
Page 10
Image 10

1250/1750/2750 Manual 3/6/02 2:45 PM Page 19

OPERATION

Note:

•Loose connections can result in a severe decrease in voltage which may cause damage to the wires and insulation.

•Failure to make proper connection between the inverter and the power source will result in reverse polarity. Reverse polarity will blow the internal fuses in the inverter and may cause per -manent damage to the inverter. Damage caused by reverse polarity is not covered under the Whistler warranty.

•Making the connection between the Positive (+) ter- minals may cause a spark as a result of current flowing to the capacitors in the inverter. This is a normal occurrence. Due to the potential for sparking, how- ever, it is extremely important that both the inverter and the 12 volt battery be well removed from any pos- sible source of flammable fumes or gases.

Failure to heed this warning could result in fire or explosion.

6.Run a ground from the Ground Lug Terminal at the rear of the inverter to a proper grounding point using the shortest practical length of 18 AWG wire. Selection of the grounding point will depend on where you are using the inverter. The ground wire may be connected to the chassis of your vehicle or to the grounding system in your boat or to the earth if you are operating the inverter in a remote location. Before

16

OPERATION

connecting the ground, make certain that the invert- er is turned off. Operating the inverter without properly grounding it may result in electrical shock.

7.Turn the inverter ON (I). Check the Bar Graph Meter on the front panel. The Voltage Bar Graph should read between 11 and 14 volts depending on the volt- age of the power source. If the reading is not within this range, check the voltage of the power source and the terminal connections on the power source and the inverter to make sure they are secure.

Neither the High Temperature or Over Load LED Indicators should be illuminated.

8.Confirm that the equipment or appliance to be oper- ated is turned off. Plug the equipment or appliance into one of the two AC receptacles on the front panel of the the inverter.

9.Turn the inverter to the ON (I) position. Turn on the equipment or appliance.

Note:

•The audible alarm may make a momentary “chirp” when the inverter is turned OFF (O). The same alarm may also sound when the inverter is being connect- ed to or disconnected from the 12 volt power source. Again, this is normal.

•The use of an extension cord from the inverter to the

17

Page 9 Page 11
Page 10
Image 10
Whistler 2000, 1000 owner manual Operation
Page 9 Page 11

2000, 1000 specifications

Whistler 1000 and Whistler 2000 are advanced radar detectors designed for high-performance performance in detecting police radar and laser systems. These models are praised for their sophisticated technology, offering drivers the confidence needed to avoid speeding tickets and enhance road safety.

The Whistler 1000 features a dual antenna system, which allows for increased sensitivity and range in detecting radar signals. This model is engineered to provide 360-degree detection, ensuring that no radar signal goes unnoticed, regardless of the direction from which it approaches. Advanced digital signal processing enhances the ability to filter out false alerts, focusing only on relevant signals, and creating a much quieter detection experience for the user.

One of the standout characteristics of the Whistler 1000 is its ability to detect multiple radar bands, including X, K, Ka, and even Laser signals. This wide range of detection is essential as it makes the device versatile enough to handle various law enforcement radar technologies. Additionally, the device features a built-in voice alert system, which gives users real-time notifications about radar detections without the need to take their eyes off the road.

Similarly, the Whistler 2000 builds on this foundation, offering even more advanced features. It includes GPS functionality for added precision in location-based alerts. This allows the device to remember locations of false alerts and minimize inconvenience in frequently traveled areas. Complete with an OLED display, the Whistler 2000 provides clear visual indicators alongside audible alerts.

Both models are equipped with City/Highway modes, allowing drivers to adjust the sensitivity of the detection based on urban or highway driving conditions. This adaptability is particularly valuable in reducing the number of false alarms commonly experienced in city driving.

Moreover, both the Whistler 1000 and 2000 are designed for ease of installation, featuring a windshield mount for secure and unobtrusive attachment. Their compact designs ensure that they blend seamlessly with a vehicle’s interior.

In summary, the Whistler 1000 and Whistler 2000 radar detectors are distinguished by their extensive detection capabilities, intelligent filtering technologies, and thoughtful user features. Together, they represent the cutting edge of radar detection technology, providing users with powerful tools for safer driving.