1250/1750/2750 Manual 3/6/02 2:45 PM Page 13

INVERTER INFORMATION

Don’t Push It.

Although your Whistler power inverter has the capacity to provide power output (excess current) equal to approxi- mately two times its rated wattage capacity for a very brief period, it is designed to operate equipment and appliances with start up load wattage ratings no higher than its own maximum continuous wattage rating.

For example, the 1500 model has a maximum continuous rating of 1500 watts. Although this model has the capacity to briefly provide up to 3000 watts of power (that is, excess current), it is designed to operate equipment and appli- ances with start up load requirements of 1500 watts or less.

Consequently, if the start up load rating of your equipment or appliance is the same or approximately the same as the maximum continuous rating of the inverter, the inverter will attempt to start loads above the continuous rating.

Some refrigerators, freezers, pumps and other similar equipment and appliances require very high start up loads to operate. Before attempting to power up this type of equipment or appliance, make especially certain that all connections have been properly made and that the power source is fully charged.

To determine whether your inverter will operate a particular piece of equipment or appliance, run a test. The inverter is

10

INVERTER INFORMATION

designed to shut down automatically in the event of a power overload. Testing appliances and equipment with start up load ratings comparable to your inverter wattage rating will not damage it.

If a piece of equipment or an appliance will not operate, first confirm that the inverter has been properly connected to the 12 volt power source (See "Making The Connection"). If all connections have been properly made, turn the inverter rocker switch ON (l), OFF (O) and ON (l) again in quick suc- cession. If this procedure is unsuccessful, it is likely that the inverter does not have the required start up capacity or your battery supply isn’t large enough to operate the equipment or appliance in question.

Selecting the Optimum Power Source.

Operating the inverter for extended periods combined with a high continuous load demand may result in excessive power drain from the battery. Therefore, the reserve capacity of the battery you select to power the inverter is an important consideration.

The potential power drain can be estimated by calculating the reserve power ("amp/hour") of the battery and the amps required by the inverter to meet the continuous load demand of the equipment or appliance being operated.

11

Page 6 Page 8
Page 7
Image 7
Whistler 1000, 2000 owner manual Inverter Information
Page 6 Page 8

2000, 1000 specifications

Whistler 1000 and Whistler 2000 are advanced radar detectors designed for high-performance performance in detecting police radar and laser systems. These models are praised for their sophisticated technology, offering drivers the confidence needed to avoid speeding tickets and enhance road safety.

The Whistler 1000 features a dual antenna system, which allows for increased sensitivity and range in detecting radar signals. This model is engineered to provide 360-degree detection, ensuring that no radar signal goes unnoticed, regardless of the direction from which it approaches. Advanced digital signal processing enhances the ability to filter out false alerts, focusing only on relevant signals, and creating a much quieter detection experience for the user.

One of the standout characteristics of the Whistler 1000 is its ability to detect multiple radar bands, including X, K, Ka, and even Laser signals. This wide range of detection is essential as it makes the device versatile enough to handle various law enforcement radar technologies. Additionally, the device features a built-in voice alert system, which gives users real-time notifications about radar detections without the need to take their eyes off the road.

Similarly, the Whistler 2000 builds on this foundation, offering even more advanced features. It includes GPS functionality for added precision in location-based alerts. This allows the device to remember locations of false alerts and minimize inconvenience in frequently traveled areas. Complete with an OLED display, the Whistler 2000 provides clear visual indicators alongside audible alerts.

Both models are equipped with City/Highway modes, allowing drivers to adjust the sensitivity of the detection based on urban or highway driving conditions. This adaptability is particularly valuable in reducing the number of false alarms commonly experienced in city driving.

Moreover, both the Whistler 1000 and 2000 are designed for ease of installation, featuring a windshield mount for secure and unobtrusive attachment. Their compact designs ensure that they blend seamlessly with a vehicle’s interior.

In summary, the Whistler 1000 and Whistler 2000 radar detectors are distinguished by their extensive detection capabilities, intelligent filtering technologies, and thoughtful user features. Together, they represent the cutting edge of radar detection technology, providing users with powerful tools for safer driving.
Top Page Image Contents