1250/1750/2750 Manual 3/6/02 2:45 PM Page 11

IMPORTANT INFORMATION

Important Information About Your New Whistler Inverter.

This manual will provide you with directions for the safe and efficient operation of your Whistle Power Inverter.

Important Note: Each of the following operating procedures and safety features must be carefully reviewed and thoroughly understood prior to using the inverter. Failure to do so may result in damage to the inverter or equipment or serious personal injury.

Notes:

Your Whistler inverter is designed to operate from a 12 volt power source only. Never attempt to connect your Whistler inverter to any other power source, including any AC power source.

• 110 volts can be lethal. Improper use of your Whistler inverter may result in property damage, personal injury or loss of life.

•Check with the appliance manufacturer for com- patibility with modified sine wave inverters. Some appliances may not work well, not at all or be dam- aged. This is especially true for medical equipment. For more information on compatibility issues, please visit our inverter FAQ page at www.whistlergroup.com/faq- inverters.asp

8

INVERTER INFORMATION

Getting Started

Power equipment and appliances which operate with motors or tubes require an initial surge of power to get them up and running. This power surge is referred to as the "starting load" or "peak load." (By comparison, electrical devices such as standard light bulbs do not require a large starting load). Once the equipment or appliance has been powered up, it settles down to a slower pace and requires far less elec- trical power to operate. This lower power requirement is referred to as the "continuous load."

In order to ensure that the capacity of your Whistler inverter is sufficient to meet the required start up load, you must first determine the power consumption of the equipment or appliance you plan to operate.

Power consumption is rated either in wattage or in amperes, and information regarding the required "watts" or "amps" generally is stamped or printed on most appliances and equipment. If this information is not indicated on the appli- ance or equipment, check the owner’s manual. Contact the appliance or equipment manufacturer to determine if the device you are using (TV’s, battery re-charger, com- puter, etc.) is compatible with a modified sine wave.

If the power consumption is rated in amps, multiply the number of amps by 110 (AC voltage) to determine the com- parable wattage rating. As a general rule, you can deter- mine the required start up load by multiplying the wattage rating by 10.

For further information on the fundamental operating prin- ciples of Whistler inverters and related technical data, see "Technical Operating Principles"

9

Page 5 Page 7
Page 6
Image 6
Whistler 2000, 1000 owner manual Important Information, Inverter Information
Page 5 Page 7

2000, 1000 specifications

Whistler 1000 and Whistler 2000 are advanced radar detectors designed for high-performance performance in detecting police radar and laser systems. These models are praised for their sophisticated technology, offering drivers the confidence needed to avoid speeding tickets and enhance road safety.

The Whistler 1000 features a dual antenna system, which allows for increased sensitivity and range in detecting radar signals. This model is engineered to provide 360-degree detection, ensuring that no radar signal goes unnoticed, regardless of the direction from which it approaches. Advanced digital signal processing enhances the ability to filter out false alerts, focusing only on relevant signals, and creating a much quieter detection experience for the user.

One of the standout characteristics of the Whistler 1000 is its ability to detect multiple radar bands, including X, K, Ka, and even Laser signals. This wide range of detection is essential as it makes the device versatile enough to handle various law enforcement radar technologies. Additionally, the device features a built-in voice alert system, which gives users real-time notifications about radar detections without the need to take their eyes off the road.

Similarly, the Whistler 2000 builds on this foundation, offering even more advanced features. It includes GPS functionality for added precision in location-based alerts. This allows the device to remember locations of false alerts and minimize inconvenience in frequently traveled areas. Complete with an OLED display, the Whistler 2000 provides clear visual indicators alongside audible alerts.

Both models are equipped with City/Highway modes, allowing drivers to adjust the sensitivity of the detection based on urban or highway driving conditions. This adaptability is particularly valuable in reducing the number of false alarms commonly experienced in city driving.

Moreover, both the Whistler 1000 and 2000 are designed for ease of installation, featuring a windshield mount for secure and unobtrusive attachment. Their compact designs ensure that they blend seamlessly with a vehicle’s interior.

In summary, the Whistler 1000 and Whistler 2000 radar detectors are distinguished by their extensive detection capabilities, intelligent filtering technologies, and thoughtful user features. Together, they represent the cutting edge of radar detection technology, providing users with powerful tools for safer driving.
Top Page Image Contents