• Remove the blade and adapter from the crankshaft.

To Replace Blade:

•Before reinstalling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil.

•Install the blade adapter on the crankshaft with the “star” away from the engine. See Figure 9A.

A

Blade

Crankshaft

Adapter

 

 

 

Blade

 

Hex Bolt

Blade Bell

 

Support

 

 

B

1.Insert screw driver through hole

2.Blade should be parallel to ground

Screw

 

 

Driver

Blade

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ground

FIGURE 9

•Place the new blade with the side marked bottom (or with part number) facing away from the adapter.

•Place the bell support next. Make sure to align the tabs in the holes of the blade with the hole in the bell support.

•Insert the hex bolt through the blade assembly. Figure 9A shows the correct order of assembly.

•Use block of wood to hold blade again while you tighten the bolt clockwise. Follow the recommended torque for the bolt which is 450-600 in.-lbs.

IMPORTANT: The bolt, used to secure the blade to the engine, is specially heat-treated. Do not substitute. To order replacement bolt, refer to the Parts List section of this manual.

WARNING: To ensure safe operation of your unit, all nuts and bolts must be checked periodically for correct tightness.

To Sharpen Blade:

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while operator is on the mower.

•Follow the original angle of grind as a guide. Make sure that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade.

NOTE: An unbalanced blade will cause excessive vibration when rotating at high speeds, may cause damage to the mower and could break, causing personal injury.

•Test the blade by balancing it on a round shaft screwdriver or a blade balancer. See Figure 9B.

•If the blade is not balanced, remove metal from the heavy side until it balances evenly.

Adjusting Handle Height

Your mower is shipped with the handle in the higher height position. To lower the handle height, proceed as follows.

•Remove the starter rope from the rope guide.

•Remove the upper handle by removing the hand knobs and carriage bolts. Lay the upper handle out of the way, being careful not to bend or kink the cables.

•Remove the hairpin clips from the weld pins on the handle brackets. Refer to Figure 3 inset. Press out on the legs of the lower handle. Remove lower handle from the mower.

13

Page 12 Page 14
Page 13
Image 13
White LC-436 manual Adjusting Handle Height, To Replace Blade, To Sharpen Blade
Page 12 Page 14

LC-436 specifications

The White LC-436 is a modern, versatile vehicle that stands out in the crowded automotive market, combining functionality and aesthetic appeal. Designed with an emphasis on efficiency and performance, it meets the demands of both city driving and rugged terrains, making it an ideal choice for a variety of users, from families to adventurous individuals.

One of the standout features of the White LC-436 is its powerful engine options. Equipped with a range of turbocharged engines, the vehicle offers excellent fuel efficiency without compromising on power. The engine lineup includes both petrol and diesel variants, catering to diverse consumer preferences. The advanced engineering behind the engines ensures that the LC-436 delivers smooth acceleration and consistent performance, whether in stop-and-go traffic or on open highways.

The design of the White LC-436 emphasizes aerodynamics, which not only contributes to its striking exterior but also enhances its overall efficiency. The sleek contours and bold front grille create a commanding presence on the road, while the spacious interior is crafted with comfort in mind. High-quality materials are used throughout the cabin, providing an inviting atmosphere for both the driver and passengers.

In terms of technology, the LC-436 is packed with innovative features that enhance the driving experience. The infotainment system includes a touchscreen interface that supports smartphone integration, allowing for easy access to navigation, music, and communication apps. Additionally, advanced driver-assistance systems such as adaptive cruise control, lane-keeping assist, and collision avoidance technology are integrated to ensure safety and ease of use.

The handling capabilities of the White LC-436 are also noteworthy. With a sophisticated suspension system and responsive steering, the vehicle offers a smooth ride across various terrains. All-wheel drive options further enhance its off-road capabilities, making it suitable for outdoor adventures.

Manufactured with sustainability in mind, the White LC-436 incorporates eco-friendly technologies, such as energy-efficient lighting and reduced emissions. This commitment to the environment is increasingly important to today's consumers.

In summary, the White LC-436 combines advanced engineering, modern design, and cutting-edge technology, establishing itself as a versatile and reliable vehicle. Whether navigating city streets or exploring off the beaten path, the LC-436 is well-equipped to meet the needs of drivers in today's dynamic world.
Top Page Image Contents