White LC-436 manual Attaching Side-DischargeChute, Attaching Rear Bagger

Attaching Side-Discharge Chute

Your lawn mower was shipped as a mulcher. Remove the mulching cover and attach the side-discharge chute to discharge grass clippings.

•Lift the hinged mulching plug. Slide the two hooks on the side discharge deflector under the hinge pin on the mulching plug assembly. See Figure 5. Lower the mulching plug.

Mulching Plug

Hinge Pin

Deflector

Hook

(Slide hooks under the two sides of hinge pin)

FIGURE 5

IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.

Attaching Rear Bagger

•To convert your mower from a mulcher to a rear bagger, remove side-discharge and lower the side mulching plug. For location of side mulching plug, see Figure 7.

•Lift the chute door on the mower. Remove the rear mulching plug. Place hooks, located on two sides of the grass catcher frame, over the chute door pivot rod on the back of the unit. See Figure 6. Release chute door.

Rear Mulching

Plug

Chute Door

Rear Discharge

Grass Catcher

FIGURE 6

•To remove the grass catcher, lift the chute door on the mower. Lift the grass catcher up, and off of the pivot rod. Release the chute door.

8