Automatic Ice and
Water Dispenser (continued)
WHITE WESTINGHOUSE ICE AND WATER FILTER SYSTEM
SYSTEM SPECIFICATION AND DATA SHEET
APPLICATION GUIDELINES / CONDITIONS OF USE
WATER SUPPLY: | Municipal or Well applications |
WATER |
|
TEMPERATURE: | Maximum 100° F. (38° C.) For cold water use only |
WATER |
|
PRESSURE: | 125 psi maximum Recommended Minimum: 30 psi, as measured at the valve inlet |
∙Timely cartridge replacement is essential for the product to perform as advertised. Please refer to the Use and Care Manual for general operation and maintenance requirements. Your refrigerator will have one of two types of filter replacement reminders. One is a simple slide knob on the rear control box that you set to six months after installing a new filter. The other is an electronic light on the freezer door dispenser that lights up yellow when the filter is almost ready for replacement and lights up red when the filter must be replaced. The indicator is pressed for approximately 10 seconds to reset after replacing the filter.
∙Ice & Water Filter System
∙Performance may vary based on local water conditions and/or pressure. High sediment areas may require more frequent filter replacement.
∙Ice & Water Filter System will absorb bad tastes and odors in both ice cubes and drinking water.
SYSTEM SPECIFICATIONS
FLOW RATE: |
| Ice Maker - 3.4 to 4.3 oz (99 - 125 cc) per 7.5 seconds at 60 psi (as measured at valve inlet) |
|
| Dispenser - 60 oz per minute (.37 gpm or 1.4 liters per minute) at 60 psi (as measured at valve |
|
| inlet) |
CAPACITY: |
| 200 Gallons |
SYSTEM |
| Filter Housing Assembly - ABS Plastic |
CONSTRUCTION: |
| Water Storage Tank - Polypropylene Plastic |
|
| Tubing - Polypropylene / Polypropylene Plastic |
|
| Filter Media - Extruded Carbon block with Polypropylene prefiltration shells |
REPLACEMENT CARTRIDGE INFORMATION
Replacement
General testwater parameters; pH = 7.5 +/- 0.5 Temp. 20°C +/- 3°C (68°F +/- 5°F) Pressure = 60 psi
Substance Reduction
Chlorine
Atrazine
2,4 D
Cysts
Particulates
Turbidity
Particle Size
Range
(microns)
N/A
N/A
N/A
N/A
N/A
3 to 4
.5 to 1
23 - 28 NTU
Average
Influent
1.9mg/l 0.15 mg/l 0.16 mg/l
.0099 mg/l
0.32mg/l
122500 ppm
240000 ppm
26 NTU
Maximum
Effluent
0.11mg/l 0.001 mg/l 0.003 mg/l
.0006 mg/l
0.04mg/l
20 count/pm
880 ppm
0.09NTU
Average
Effluent
0.04mg/l 0.001 mg/l 0.002 mg/l
.0005 mg/l
0.018 mg/l
10count/pm 410 ppm
0.07NTU
Average
%
Reduction
97.80%
99.30%
98.75%
94.90%
94.20%
99.99%
99.80%
99.70%
EPA
M.C.L.
N/A
15.0ug/l
15.0ug/l 3.0 ug/l 70 ug/l
N/A
N/A
N/A
Minumun
%
Reduction
94.80%
99.20%
97.90%
92.60%
85.20%
99.98%
99.50%
N/A
11
