•Plug the wire from the headlight into the wire lead coming from the right side of the engine, beneath the fuel tank.

Final Adjustments

Auger Control Adjustment

Check the adjustment of the auger control as follows:

•Push forward on the auger control until the small rubber bumper contacts the upper handle. There should be slack in the cable. See Figure 5.

•Release the auger control. The cable should be straight. Make certain you can depress the auger control against the left handle completely.

If adjustment is necessary, proceed as follows:

•Loosen the jam nut and thread the cable in (for less slack) or out (for more slack) as necessary. See Figure 5.

•Recheck the adjustment before retightening the jam nut against the cable.

Auger

Control

Z-End

Jam Nut

Auger

Control Cable

Figure 5

Skid Shoe Adjustment

The space between the shave plate and the ground can be adjusted by repositioning the skid shoes found on either side of the snow throwers auger housing. For close snow removal, place skid shoes in the low position. Use middle or high position when area to be cleared is uneven. See Figure 6.

IMPORTANT: It is NOT recommended that this snow thrower be operated on a gravel surface, as loose stones can be easily picked up and thrown by the machine. If you must operate on a gravel surface, ALWAYS adjust the skid shoes into the HIGH position to allow the shave plate maximum clearance.

Adjust skid shoes as follows:

•Loosen, but do NOT remove, the three hex nuts which fasten the skid shoe to the auger housing.

•Raise or lower the skid shoe to desired position.

NOTE: Make certain the entire base of both skid shoes are against the ground to avoid uneven wear on the skid shoes. When one side does wear out, the skid shoes are reversible.

Skid

Hex Nuts

Shoes

Figure 6

•Retighten the hex nuts loosened earlier.

•Repeat this adjustment on the skid shoe found on the opposite side of the snow thrower.

Traction Control and Shift Lever Adjustment

To check the adjustment of the traction control and shift lever, proceed as follows:

•Move the shift lever into sixth (6) position.

a.With the traction control (refer to Figure 7) released, squeeze in triggers and gently push the snow thrower forward, then pull it back. Disregarding the overall weight of the snow thrower, the machine should otherwise move freely.

b.Engage the traction control and attempt to move them machine both forward and rearward. You should experience resistance as the wheels should not be turning.

•Move the shift lever into the fast reverse (R2) position and repeat the previous steps (a & b).

If you experienced resistance either when repositioning the shift lever from 6 to R2 or when attempting to move the machine forward or rearward with the traction control released, your snow thrower’s traction control is in need of adjustment and you should NOT operate the machine before completing the adjustment as follows:

•Loosen the jam nut on the traction control cable and UNTHREAD the cable one full turn.

•Recheck the adjustment.

•Retighten the jam nut to secure the cable when correct adjustment is reached.

6

Page 5 Page 7
Page 6
Image 6
White Outdoor 750T manual Final Adjustments, Auger Control Adjustment, Skid Shoe Adjustment
Page 5 Page 7

750T specifications

The White Outdoor 750T is a robust and reliable machine designed to meet the demands of outdoor maintenance tasks. This versatile piece of equipment is particularly well-regarded for its performance in various applications, including landscaping, snow removal, and light-duty towing. Below are the key features and technologies that distinguish the White Outdoor 750T.

Powerful Engine: At the heart of the White Outdoor 750T is a potent engine that provides ample power for a range of tasks. This engine is designed for efficiency and durability, ensuring that it can withstand prolonged use in challenging conditions. Coupled with its reliable performance, it allows users to tackle tough jobs with ease.

Superior Cutting Deck: The 750T features an innovative cutting deck that maximizes efficiency and effectiveness. Its design allows for a clean and precise cut, which is crucial for maintaining a well-groomed lawn. The deck is adjustable, enabling users to easily change cutting heights to suit different grass types and environmental conditions.

Rugged Construction: Built with high-quality materials, the White Outdoor 750T is designed to endure heavy usage. Its rugged construction ensures that it can tackle rough terrain without compromising performance. This durability makes it a favored choice among both homeowners and professional landscapers.

User-Friendly Controls: The machine's user-friendly control layout makes it accessible for operators of all skill levels. Intuitive controls allow users to quickly familiarize themselves with the functions, enhancing overall efficiency and safety during operation.

Advanced Safety Features: Safety is a top priority in the design of the White Outdoor 750T. Equipped with several safety features, including an automatic shut-off mechanism, it helps prevent accidents and enhances user confidence during operation. This focus on safety ensures that both the operator and bystanders remain protected.

Versatility: One of the standout characteristics of the 750T is its versatility. Users can attach various accessories, such as plows and spreaders, allowing the machine to adapt to different tasks throughout the year. This multifunctionality makes it a valuable asset for homeowners who seek an all-in-one solution for their outdoor needs.

In summary, the White Outdoor 750T combines a powerful engine, superior cutting deck, rugged construction, user-friendly controls, advanced safety features, and the ability to handle various attachments. Its blend of performance and durability makes it an excellent choice for anyone looking to maintain their outdoor space.
Top Page Image Contents