•A plastic cup is provided inside the fuel fill opening on the fuel tank. Remove and discard this cup before filling up the tank. Use the separate fuel tank cap to close after fill-up.

To Start Engine

NOTE: If unit shows any sign of motion (drive or augers) with the clutch grips disengaged, shut engine off immediately. Readjust as instructed in the Final Adjustments in the Assembly Section.

•Attach spark plug wire to spark plug. Make certain the metal loop on end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug.

•Make certain the fuel cutoff valve is in the OPEN (vertical position). See Figure 7.

•Make certain the auger and drive clutch levers are in the disengaged (released) position.

•Move throttle control up to FAST position. Insert ignition key into slot. See Figure 7. Be certain it snaps into place. Do not turn key.

NOTE: Engine will not start unless ignition key is inserted into ignition slot in carburetor cover.

Electric Starter

•Determine that your house wiring is a three-wire grounded system. Ask a licensed electrician if you are not certain.

•If your house wiring system is not a three-wire grounded system, do not use this electric starter under any conditions.

WARNING: The electric starter is equipped with a grounded three-wire power cord and plug and is designed to operate on 120 volt AC household current. It must be used with a properly grounded three-prong receptacle at all times to avoid the possibility of electric shock. Follow all instructions carefully prior to operating the electric starter.

•If your home electrical system is grounded, but a three-hole receptacle is not available, one should be installed by a licensed electrician before using the electric starter.

•If you have a grounded three-prong receptacle, proceed as follows:

•Rotate choke knob to OFF position and do not prime engine.

•Connect power cord to switch box on engine. Plug the other end of power cord into a three-hole, grounded 120 volt AC receptacle.

•Push starter button on top of the engine to crank engine. As you crank the engine, move choke knob to FULL choke position.

•When engine starts, release starter button, and move choke gradually to OFF. If engine falters, move choke immediately to FULL and then gradually to OFF.

•When disconnecting the power cord, always unplug from the three-prong receptacle first and then from the snow thrower.

Recoil Starter

•Rotate choke knob to FULL choke position (cold engine start). If engine is warm, place choke in OFF position instead of FULL.

•Push primer button two or three times. If engine is warm, push primer button once only.

NOTE: Always cover vent hole in primer button when pushing. Additional priming may be necessary for first start if temperature is below 15°F.

•Grasp starter handle and pull rope out slowly, until it pulls slightly harder. Let rope rewind slowly.

•Pull starter handle rapidly. Do not allow handle to snap back. Allow it to rewind slowly while keeping a firm hold on the starter handle.

•Repeat the previous steps until engine starts.

To Stop Engine

•Run engine for a few minutes before stopping to help dry off any moisture on the engine.

•To help prevent possible freeze-up of starter, proceed as follows.

Electric Starter:

•Connect power cord to switch box on engine, then to 120 volt AC receptacle. With the engine running, push starter button and spin the starter for several seconds. The unusual sound made by spinning the starter will not harm engine or starter. Disconnect the power cord from receptacle first, and then from switch box.

Recoil Starter

•With engine running, pull starter rope with a rapid, continuous full arm stroke three or four times. Pulling the starter rope will produce a loud clattering sound, which is not harmful to the engine or starter.

•Move throttle control to “stop” or “off” position.

•Remove ignition key. Do not turn key. Disconnect the spark plug wire from the spark plug to prevent accidental starting while equipment is unattended.

NOTE: Keep it in a safe place. Engine will not start without ignition key.

Wipe all snow and moisture from the carburetor cover in the area of the control levers. Also, move control levers back and forth several times.

9

Page 8 Page 10
Page 9
Image 9
White Outdoor 750T manual To Start Engine, Electric Starter, Recoil Starter, To Stop Engine
Page 8 Page 10

750T specifications

The White Outdoor 750T is a robust and reliable machine designed to meet the demands of outdoor maintenance tasks. This versatile piece of equipment is particularly well-regarded for its performance in various applications, including landscaping, snow removal, and light-duty towing. Below are the key features and technologies that distinguish the White Outdoor 750T.

Powerful Engine: At the heart of the White Outdoor 750T is a potent engine that provides ample power for a range of tasks. This engine is designed for efficiency and durability, ensuring that it can withstand prolonged use in challenging conditions. Coupled with its reliable performance, it allows users to tackle tough jobs with ease.

Superior Cutting Deck: The 750T features an innovative cutting deck that maximizes efficiency and effectiveness. Its design allows for a clean and precise cut, which is crucial for maintaining a well-groomed lawn. The deck is adjustable, enabling users to easily change cutting heights to suit different grass types and environmental conditions.

Rugged Construction: Built with high-quality materials, the White Outdoor 750T is designed to endure heavy usage. Its rugged construction ensures that it can tackle rough terrain without compromising performance. This durability makes it a favored choice among both homeowners and professional landscapers.

User-Friendly Controls: The machine's user-friendly control layout makes it accessible for operators of all skill levels. Intuitive controls allow users to quickly familiarize themselves with the functions, enhancing overall efficiency and safety during operation.

Advanced Safety Features: Safety is a top priority in the design of the White Outdoor 750T. Equipped with several safety features, including an automatic shut-off mechanism, it helps prevent accidents and enhances user confidence during operation. This focus on safety ensures that both the operator and bystanders remain protected.

Versatility: One of the standout characteristics of the 750T is its versatility. Users can attach various accessories, such as plows and spreaders, allowing the machine to adapt to different tasks throughout the year. This multifunctionality makes it a valuable asset for homeowners who seek an all-in-one solution for their outdoor needs.

In summary, the White Outdoor 750T combines a powerful engine, superior cutting deck, rugged construction, user-friendly controls, advanced safety features, and the ability to handle various attachments. Its blend of performance and durability makes it an excellent choice for anyone looking to maintain their outdoor space.
Top Page Image Contents