Engine

A list of key maintenance jobs required for good performance by the mower is given below. Follow the accompanying engine manual for detailed list and instructions.

•Change engine oil after the first two operating hours and every 25 operating hours thereafter. Always check oil level before starting engine.

•Clean the engine periodically. Remove dirt and debris with a cloth or brush. We do not recommend the use of pressure washers or garden hose to clean your unit.These may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of water will shorten life of the mower and reduce its serviceability.

•Clean the spark plug and reset the gap to .030” at least once a season or every 50 hours of operation. Spark plug replacement is recommended at the start of each season. Refer to the engine manual for correct spark plug type.

•Inspect muffler periodically, and replace if necessary. Damaged mufflers or spark arresters can create a fire hazard.

WARNING: Make sure to avoid muffler and surrounding areas while the mower engine is hot because temperature of these areas of the engine may exceed 150o F.

Lubrication

(Refer to Lubrication Chart in Figure 15.)

WARNING: Always stop engine and disconnect spark plug wire before cleaning, lubricating or doing any kind of work on lawn mower.

Blade Control

•Lubricate the pivot points on the blade control handle and the brake cable at least once a season with light oil. The blade control must operate freely in both directions.

Rear & Side Discharge Doors

•The torsion springs and pivot points should be lubricated periodically with light oil to prevent any rust or binding. Door must work freely.

Wheels

•The wheels require no lubrication. However, if the wheels are removed for any reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light oil. Engine oil may also be used.

Transmission

•The transmission is pre-lubricated and sealed at the factory and does not require lubrication on a regular basis as part of maintenance. However, if

you disassemble the transmission for any reason, refill with two ounces of Alvania grease (part # 737- 0168) as part of reassembly.

Engine

•Follow engine manual for instruction and schedule of lubrication.

NOTE: When tipping the unit, empty the fuel tank and keep engine spark plug side up.

 

 

 

e

 

 

 

 

b

u

 

L

 

 

 

Lube

Lube

Lube

Figure 15: Lubrication Chart

Blade Care

•Periodically inspect the blade adapter and pulley for cracks, especially if you strike a foreign object. Replace when necessary.

WARNING: When removing the cutting blade for sharpening or replacement, protect hands by using heavy gloves or a thick rag to grasp the cutting blade.

•Disconnect spark plug wire from spark plug.

To Remove Blade

•Remove the bolt and bell washer which hold the blade-pulley assembly to the engine crankshaft. See Figure 16. Remove assembly from crankshaft.

•Remove the two bolts and lock nuts from the blade assembly.

•Remove the blade from the blade adapter and pulley.

To Replace Blade:

•Before reinstalling the blade-pulley assembly to the unit, lubricate engine crankshaft and inner surface

of the blade adapter with light oil or engine oil.

13

Page 12 Page 14
Page 13
Image 13
White Outdoor HW-656 manual Engine, Lubrication, Blade Care
Page 12 Page 14

HW-656 specifications

The White Outdoor HW-656 is a versatile and powerful utility tractor designed for both commercial and residential use. With its robust construction and advanced features, the HW-656 stands out in the crowded market of outdoor equipment.

One of the main features of the HW-656 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, the tractor delivers consistent performance and high torque. This makes it ideal for heavy-duty tasks such as mowing large lawns, towing trailers, and even performing snow removal in colder months.

The HW-656 also showcases a unique transmission system. Its hydrostatic transmission provides a seamless driving experience, allowing operators to adjust speed without needing to shift gears. This feature enhances maneuverability, making it easier to navigate tight spots and uneven terrain.

Comfort is another focus in the design of the HW-656. The tractor comes with an ergonomic seating arrangement and adjustable controls, which reduce operator fatigue during extended use. The spacious footwell and cushioned seat ensure that users can work comfortably for hours, whether they are mowing fields or hauling materials.

In terms of attachment compatibility, the HW-656 excels due to its integrated hitch system. This allows for easy attachment of various implements such as plows, cultivators, and lawn sweepers, making it a multi-functional tool suitable for various gardening and landscaping tasks.

Safety features are also a notable aspect of the HW-656. The tractor includes a roll-over protection system, ensuring that users remain safe even in challenging conditions. Additionally, the intuitive control layout makes it easy for users to operate essential functions without distraction.

Another significant characteristic of the HW-656 is its durability. Built with high-quality materials, this tractor can withstand the rigors of tough outdoor work. Its weather-resistant coating helps protect against rust and damage, ensuring longevity even in harsh environments.

Overall, the White Outdoor HW-656 is a reliable and efficient choice for anyone looking to tackle outdoor chores, from lawn maintenance to heavy-duty hauling. Its powerful engine, comfortable design, versatile attachments, and robust safety features make it a standout option in the outdoor power equipment market.
Top Page Image Contents