Turn mower on its side making sure that the air filter and the carburetor are up.

Lock Nut

 

Pulley

 

 

Assembly

Blade

 

Lock Nut

Adapter

Blade

Hex Bolt

Hex Bolt

Bell

Hex Bolt

Washer

 

Figure 16

Also lubricate the bolt holes, bolt and the inner surface of the nuts.

Install the blade adapter on the pulley with the “star” away from the pulley. See Figure 16.

Place the new blade on the blade adapter with the side marked bottom (or with part number) facing away from the adapter.

Secure the blade to the assembly with two hex bolts and lock nuts. Tighten the hex bolts to the recommended torque. Refer to ‘Blade Mounting Torque’ section on this page.

Install the blade assembly on the crankshaft. See Figure 16. Secure with the hex bolt and bell washer (cupped side of washer to blade) and tighten to the recommended torque. Refer to ‘Blade Mounting Torque’ section on this page.

IMPORTANT:The bolt, used to secure the blade to the engine, is specially heat-treated. Do not substitute. To order replacement bolt, refer to the parts list in the back of this manual.

WARNING: To ensure safe operation of your lawn mower, check all nuts and bolts periodically and tighten if necessary.

To Sharpen Blade:

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen the blade while it is still on the mower.

Follow the original angle of grind as a guide. Make sure that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade.

NOTE: An unbalanced blade will cause excessive vibration when rotating at high speeds, may cause damage to the mower and could break, causing personal injury.

The blade can be tested by balancing it on a round shaft screwdriver. See Figure 17. Remove metal from the heavy side until it balances evenly. It is recommended that the blade always be removed from the adapter for the best test of balance.

1.

Insert screw driver through hole

2.

Blade should be parallel to ground

Screw

Blade

Driver

 

 

Ground

Figure 17

Blade Mounting Torque:

Blade adapter bolts: 120 in.lbs. minimum, 150 in.lbs. maximum.

Center bolt: 450 in.lbs. minimum, 600 in.lbs. maximum.

Replacing Drive Belt

Idler

Bracket

Drive

Belt

Bolt

Pulley

Lock Nut

Belt

 

Keeper

ShoulderIdler

Screw

Front Drive

Cover

The wheels have been moved forward in this picture for clarity. Do not remove the wheels away from the mower housing while performing the job.

Figure 18

Remove the two shoulder screws which secure the front drive cover to the mower deck. See Figure 18.

Remove the front drive cover from the unit by lightly pressing inward on the sides of the front drive cover. This will release the tabs that secure the front drive cover to the height adjuster brackets.

Remove the idler from the idler bracket using 7/16” wrench and socket. See Figure 18.

Remove the belt from the transmission pulley as shown in Figure 18.

Lift and stabilize the front of the deck.

14

Page 14
Image 14
White Outdoor HW-656 manual Replacing Drive Belt, To Sharpen Blade, Blade Mounting Torque

HW-656 specifications

The White Outdoor HW-656 is a versatile and powerful utility tractor designed for both commercial and residential use. With its robust construction and advanced features, the HW-656 stands out in the crowded market of outdoor equipment.

One of the main features of the HW-656 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, the tractor delivers consistent performance and high torque. This makes it ideal for heavy-duty tasks such as mowing large lawns, towing trailers, and even performing snow removal in colder months.

The HW-656 also showcases a unique transmission system. Its hydrostatic transmission provides a seamless driving experience, allowing operators to adjust speed without needing to shift gears. This feature enhances maneuverability, making it easier to navigate tight spots and uneven terrain.

Comfort is another focus in the design of the HW-656. The tractor comes with an ergonomic seating arrangement and adjustable controls, which reduce operator fatigue during extended use. The spacious footwell and cushioned seat ensure that users can work comfortably for hours, whether they are mowing fields or hauling materials.

In terms of attachment compatibility, the HW-656 excels due to its integrated hitch system. This allows for easy attachment of various implements such as plows, cultivators, and lawn sweepers, making it a multi-functional tool suitable for various gardening and landscaping tasks.

Safety features are also a notable aspect of the HW-656. The tractor includes a roll-over protection system, ensuring that users remain safe even in challenging conditions. Additionally, the intuitive control layout makes it easy for users to operate essential functions without distraction.

Another significant characteristic of the HW-656 is its durability. Built with high-quality materials, this tractor can withstand the rigors of tough outdoor work. Its weather-resistant coating helps protect against rust and damage, ensuring longevity even in harsh environments.

Overall, the White Outdoor HW-656 is a reliable and efficient choice for anyone looking to tackle outdoor chores, from lawn maintenance to heavy-duty hauling. Its powerful engine, comfortable design, versatile attachments, and robust safety features make it a standout option in the outdoor power equipment market.