White Rodgers 1F80-241 specifications Configuration Menu, Display

CONFIGURATION MENU

1

2

		FAN	SYSTEM
TIME PRGM	RUN	HOLD
		ON AUTO	COOL OFF HEAT

3	4	5	6	7	8
9						9
MO TU WE TH FR						SA SU
	AM
						PM
				HOLD
11		12	10	13	11	10

Figure 8. Thermostat display, buttons, and switches

7FAN switch (ON, AUTO).

8SYSTEM switch (COOL, OFF, HEAT).

The Display

9 Indicates day of the week.

10Flame icon () is displayed when the SYSTEM switch is in the HEAT position. Snowflake icon ()is displayed (non- flashing) when the SYSTEM switch is in the COOL position. Snowflake is displayed (flashing) if the thermostat is in lockout mode to prevent the compressor from cycling too quickly.

11Alternately displays current time and temperature.

12Displays currently programmed set temperature (this is blank when SYSTEM switch is in the OFF position).

The word HOLD is displayed when the thermostat is in the

HOLD mode. HOLD is displayed flashing when the thermo- stat is in a temporary HOLD Mode.

The configuration menu allows you to set certain thermostat operating characteristics to your system or personal requirements.

Press RUN to make sure the thermostat is in the run program mode, then press PRGM and RUN at the same time to enter the configuration menu. The display will show the first item in the configuration menu.

The configuration menu chart below summarizes the configura- tion options. An explanation of each option follows.

Press HOLD to change to the next menu item or press TIME to go backwards to the previous item in the menu. To exit the menu and return to the program operation, press RUN. If no keys are pressed within fifteen minutes, the thermostat will revert to normal operation.

1)Select Temporary Hold Time - The thermostat can hold any temperature you set it to for the amount of time you select on this option. Your choices are 0:00 to 8:00 hours in 15 minute increments. 0:00 disables the function

Example: Using the Temporary Hold Function

1.You have selected 3:00 hours for the Temporary Hold time period.

2.With the thermostat set to Heat or Cool, press HOLD for five seconds (time will show 3:00 hours as a setting reminder).

3.HOLD on the display will blink.

4.Use or to set the temperature to your prefer- ence. The thermostat will maintain this temperature setting for 3 hours with HOLD blinking to remind you it is in Temporary Hold. After 3 hours the thermostat will go back to the program temperature and HOLD will no longer blink or display.

2)Select FA or SL (Fast or Slow) Heating Cycle Rate - The FA setting is frequently used for gas, oil or electric heat. The SL setting produces a longer heating cycle which is nor- mally for hot water or steam (hydronic) systems. Both settings produce very accurate temperature control and

can be set to your personal preference. FA cycles the system just under 1°F and the SL setting cycles at approxi- mately 1.5°F.

3)Select backlit display - The display backlight improves display contrast in low lighting conditions. Selecting back- light ON will keep the light on continuously. Selecting OFF will keep the light off.

Configuration Menu

Step	Press Button(s)	Displayed (Factory Default)	Press	or	to select:	COMMENTS
1	PRGM	HOLD		0 to 8 hrs (in		Select temporary Hold time
	and RUN	(0:00)	15 minute increments0)
2	HOLD*			SL		Select FA or SL (Fast or Slow) heating cycle rate
		(FA)
3	HOLD*	d-L		OFF		Select display backlight OFF or ON
		(ON)
4	HOLD*	E		OFF		Select Energy Management Recovery OFF or ON
		(ON)
5	HOLD*	LOC		ON		Select Compressor lockout OFF or ON
		(OFF)
6	HOLD*	0 HI		4 LO to		Select temperature display adjustment higher or lower
		(0)		4 HI
7	HOLD*	(F)		°C		Select temperature display to °F or °C
8	RUN					Returns to normal operation

*Press HOLD to advance to next item or TIME to move backwards to previous item

4