White Rodgers 1F85-0422, 1F83-0422 Thermostat INSTALLER/CONFIGURATION Menu, Press, 1F85 1F83

INSTALLER/CONFIGURATION MENU

To enter the Configuration Menu, SYSTEM must be set to HEAT, COOL, EMER or AUTO. With thermostat in Heat, Cool or Auto, in normal operation, press the Menu button for at least 5 seconds. The display will show item #1 in the table below. Press

Menu to advance to the next menu, Press or to change an item option. Shaded items are not available to 1F83.

INSTALLER/CONFIGURATION MENU

MENU			MS/	DISPLAYED	Press	or	to
SCREEN #								COMMENTS
			SS	(FACTORY DEFAULT)	select from listed options
1F85	1F83	HP
01	01			(OFF) Lk		L		Selects Keypad Lockout.
								(Not available on earlier models, see 37-6894D)
02	02			(000) Lk	001 to 999			Selects Keypad lockout combination number
03	03			(MS 2)	HP 1, SS 1			Selects Multi-Stage (MS 2 No Heat Pump),
								Heat Pump 1 (HP 1, 1 compressor),
								or Single Stage (SS 1)
04	04			(GAS)		ELE		Select Gas or Electric heat
				(ELE)		GAS
05	05			(0)	1, 2, 4, 5, 6			Selects Cool Savings
				CS				Value 1 (low) to 6 (high), Value 0 Disables Feature
06	—			(On)		OFF		Selects Energy Management Recovery (EMR)
				E				On or OFF. 1F85 only
07	06			(ME)		SL, FA		Adjustable Anticipation:
				CR Heat				Selects heating cycle rate for MS or SS
08	07			(ME)		SL, FA		Adjustable Anticipation: Selects the cycle rate for
				CR Cool				cooling (only when MS2 or SS1 is selected in item 1)
09	08			(ME)		SL, FA		Adjustable Anticipation (Heat Pump)
				CR Heat Pump				(only when heat pump is selected in #1)
10	09			(FA)		SL		Selects the cycle rate for Emergency mode and
				CR Emer				Auxiliary stage if Heat Pump is selected in item 1)
11	10			(OFF) CL		CL On		Compressor Lockout Time
12	11			Heat-Auto-Cool-Off	Auto-Off, Cool-Off,			Selects System Mode Configuration
					Heat-Off without Fan,
					Heat-Off Heat-Cool-Off
13	12			(On) dL		dL OFF		Selects Display Light On or OFF
14	13			0	1 HI, 2 HI, 3 HI, 4 HI,			Adjustable Ambient Temperature Display
				(current temperature)	1 LO, 2 LO, 3 LO, 4 LO
15	14			°F		°C		Selects Fahrenheit/Celsius Temperature Display
16	15			L (90) Heat	L 62 to L 89			Selects Limited HEAT Range
17	16			L (45) Cool	L 46 to L 82			Selects Limited COOL Range
18	—			P3		P0, P2		Defaults for 5+1+1 programming (P3) but non-
								programmable (PO) or 5+2 programming (P2)
								is available on most models. 1F85 only
19	—			(On) AS Heat		OFF		Automatic Schedule for heat mode. 1F85 only.
								NA to Cool only system.
20	—			(On) AS Cool		OFF		Automatic Schedule for cool mode. 1F85 only.
								NA to Heat only system.
21	17			(On) FA Heat		OFF		Fast Heat option may be disabled by selecting OFF.
								NA to SS config. NA to Cool only system.
22	18			(On) FA Cool		OFF		Fast Cool option may be disabled by
								selecting OFF. NA to SS config.
								NA to Heat only system.
23	19			(OFF) CA		On		Selects active Comfort Alert On or OFF.
								Require CA II Module. (Not available on earlier models)
24	—			(On) dS		OFF		Selects Automatic daylight Savings Time option
								On or OFF. 1F85 only
25	20			(OFF) Change Filter		On		Selects Filter Change-out Indicator On or OFF.
26	21			(200 h) Change Filter	25-1975 h			Change Filter time in 25 hour increments. This
								menu only appears if On is selected in above.
27	22			(o) On Cool	(b) On Heat			Selects operation of the reversing valve terminal
								(O/B) output as an O or B terminal.

4