Beforeyoubeginprogrammingyourthermostat,youshouldbe familiarwithitsfeaturesandwiththedisplayandthelocation andoperationof thethermostatbuttonsYourthermostat. consistsoftwoparts:thethermostatcoverandthebaseTo. removethecover,pullitstraightoutfromthebaseToreplace. thecover,lineupthecoverwiththebaseandpressuntilthe coversnapsontothebase.
The Thermostat Buttons and Switches
Raises temperature setting
Lowers temperature setting.
TIME button.
PRGM (program) button.
RUN (run program) button.
HOLD temperature button.
QFAN switch (ON, AUTO)
SYSTEM button (COOL, AUTO, HEAT, EMER, OFF)
OPERATION
(I 15) | e |
| ® |
.... | OOFirO | Q | _ | I |
r | I |
|
C! "Lr IJ | I | _F! UUI |
The Display
®Indicates day of the week.
@Flame icon (_) is displayed when the system is in HEAT mode. Snowflake icon
the system is in COOL mode. Flame icon (_) and
Snowflake icon
Displays "BATT" when the 2 "AA" batteries are low and should be replaced. Only "BATT" and "LO" in the minutes field are displayed when batteries are low and with no system power.
Alternately displays current time and temperature. Dis- plays "LO" in the minutes field when batteries are low.
The word "HOLD" is displayed when the thermostat is in the HOLD mode. "HOLD" is displayed flashing when the thermostat is in a temporary HOLD mode.
Displays currently programmed set temperature (this is blank when SYSTEM is OFF).
Displays "FLTR" when the system has run for the programmed filter time period as a reminder to change or clean your filter.
The configuration menu allows you to set certain thermostat operating characteristics to your system or personal require- ments.
Set SYSTEM button to OFF, then simultaneously press (£) and (£) to enter configuration menu. The display will show the first item in the configuration menu.
The configuration menu table summarizes the configuration options. An explanation of each option follows.
Press SYSTEM to change to the next menu item. To exit the menu and return to the program operation, press RUN. If no keys are pressed within fifteen minutes, the thermostat will revert to normal operation.
Figure 6 - Thermostat display, buttons and switches
@Display (1) when in keypad lockout mode.
@"EMER" is displayed flashing when the system is in EMER mode.
@The word "FAULT" will be displayed when there is a malfunction in the HEAT/COOL system.
@Display (L) when limited HEAT/COOL range is activated. The "L" icon will flash if an attempt is made to adjust the temperature beyond the limited HEAT/COOL temperature range.
@Stage1 & 2 indicators: The thermostat shall indicate when the first and second stage is energized except in emergency mode. The icon is "STG 1" for the first stage energized. The icons for the first and second stage energized are "STGI+2" located in the upper right side of the display.
CONFIGURATION MENU
1) Single Stage,
toggled to "SSl", "HP2", or "HPI" by pressing the (_ or
(_ key. In
2)Programs Per Week - This control can be configured for 7 independent day or 5/1/1/ programming or