White Rodgers 1F85ST-0422 Enter the Cooling Program, Planning Your Program Important

PROGRAMMING (For Programmable Model Only)

9)Repeat steps 2 through 8 until all of the program times and temperatures are set for all program periods on that day.

10)Press Programa to the next day and repeat steps 2 through 9.

11)When programming is complete and all of the times and temperatures match your desired heating schedule, press Arrancar. The thermostat will now run your program.

Enter the Cooling Program

1)Press SISTEMA button to select “Frio” in the system switch area indicating the active mode being pro- grammed.

2)Follow Enter Heating Program instructions for entering cooling times and temperatures.

Energy Saving ENERGY STAR® Factory Pre-Program

The 1F85ST-0422 thermostats are programmed with the energy saving settings shown in the table below for all days of the week. If this program suits your needs, simply set the

thermostat clock and press the Arrancar button.

The table below shows the factory set heating and cooling schedule for all days of the week.

	Wake Up		Leave For Work		Return Home		Go To Bed
	(Period 1)		(Period 2)		(Period 3)		(Period 4)
Heating	6:00 AM	70°F	8:00 AM	62°F	5:00 PM	70°F	10:00 PM	62°F
Program
Cooling	6:00 AM	75°F	8:00 AM	83°F	5:00 PM	75°F	10:00 PM	78°F
Program

Planning Your Program – Important

The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures.

The 1F85ST-0422 comes configured for 5/1/1 day program- ming and can also be configured for 5/2 day programming (see configuration section).

Factory settings are listed on Monday through Friday, Satur- day and Sunday. If you are re-programming a 5/2 day sched- ule, pencil in your own times and temperatures directly below the factory times and temperatures.

If you are re-programming a 5+1+1 fill in all lines with the times and temperatures you want.

Keep the following guidelines in mind when planning your program.

•In Heating, lower temperatures will save energy.

•In Cooling, higher temperatures will save energy.

•If you plan on using Auto Changeover, do not program the heating higher than the cooling.

Worksheet for Re-Programming 5/2 Day and 5+1+1 Day Program

Heating	Wake Up		Leave For Work		Return Home		Go To Bed
Program	(Period 1)		(Period 2)		(Period 3)		(Period 4)
Mo-Fri	6:00 AM	70°F	8:00 AM	62°F	5:00 PM	70°F	10:00 PM	62°F
Sat-Sun	6:00 AM	70°F	8:00 AM	62°F	5:00 PM	70°F	10:00 PM	62°F
or Sat
Sun	6:00 AM	70°F	8:00 AM	62°F	5:00 PM	70°F	10:00 PM	62°F
5+1+1 only

Heating	Wake Up		Leave For Work		Return Home		Go To Bed
Program	(Period 1)		(Period 2)		(Period 3)		(Period 4)
Mo-Fri	6:00 AM	75°F	8:00 AM	83°F	5:00 PM	75°F	10:00 PM	78°F
Sat-Sun	6:00 AM	75°F	8:00 AM	83°F	5:00 PM	75°F	10:00 PM	78°F
or Sat
Sun	6:00 AM	75°F	8:00 AM	83°F	5:00 PM	75°F	10:00 PM	78°F
5+1+1 only

7