
INSTALLER/CONFIGURATION MENU
Press the Menu button for at least 5 seconds. The display will show item #1 in the table below. Press Menu to advance to the
next menu item. Press or
to change a menu item. Shaded items are not available on 1F86.
INSTALLER/CONFIGURATION MENU
MENU |
|
| PRESS | DISPLAYED | Press |
|
| or |
|
| to |
| |
|
|
|
|
|
|
| |||||||
|
| select from listed options |
| ||||||||||
REF | HP | SS | BUTTON | (FACTORY DEFAULT) | COMMENTS | ||||||||
|
|
|
|
|
|
| |||||||
1 | 1 |
| MENU | On (Frio O) | Calor b On |
| Reversing Valve Output (SS/HP switch must | ||||||
|
|
|
|
|
|
|
|
|
|
|
| be in the Heat Pump HP position) | |
2 | 2 | 1 | MENU | P (2) |
| P 3, P 0 |
| Selectable Programs Per Week | |||||
|
|
|
|
|
|
|
|
|
|
|
| (For programmable thermostat only) | |
3 | 3 | 2 | MENU | Frio Ahorra CE | Frio Ahorra CE On | Select Frio Ahorra (Cool Savings) on or off | |||||||
|
|
|
| (OFF) |
|
|
|
|
|
|
|
| |
|
|
| MENU | Frio Ahorra (3) | 6, 5, 4, 2, 1 |
|
| Selects Frio Ahorra value 1 (low) to 6 (high) | |||||
4 | 4 | 3 | MENU | E (On) |
| E OFF |
| Selects Energy Management Recovery (EMR) | |||||
|
|
|
|
|
|
|
|
|
|
|
| on or off | |
5 |
| 4 | MENU | CR Calor |
| AL, bA |
| Adjustable Anticipation (Calor) (only when | |||||
|
|
|
| (ME) |
|
|
|
|
|
|
| SS/HP switch is at the SS position) | |
6 |
| 5 | MENU | CR Frio |
|
| bA |
| Adjustable Anticipation (Frio) (only when | ||||
|
|
|
| (AL) |
|
|
|
|
|
|
| SS/HP switch is at the SS position) | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
7 | 5 |
| MENU | CR Bomba de Calor |
|
| bA |
| Adjustable Anticipation (Bomba de Calor) | ||||
|
|
|
| (AL) |
|
|
|
|
|
|
| (only when SS/HP switch is at the HP position) | |
8 | 6 | 6 | MENU | Cd (OFF) |
| Cd On |
| Compressor Lockout Time | |||||
9 | 7 | 7 | MENU | Auto Calor | Calor Frio Off, |
| System Mode Confi guration | ||||||
|
|
|
| Frio Off | Calor Off withVent icon, | with Automatic Changeover | |||||||
|
|
|
|
| Calor Off without Vent |
| |||||||
|
|
|
|
| icon, Frio Off, |
|
| ||||||
|
|
|
|
|
| Auto Off |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
10 | 8 | 8 | MENU | L (On) |
| L OFF |
| Selects Display Light on or off | |||||
|
|
|
|
|
|
|
|
|
|
| |||
11 | 9 | 9 | MENU | 0 | 1 AL, 2 AL, 3 AL, 4 | Adjustable Ambient Temperature Display | |||||||
|
|
|
|
|
|
| AL, |
|
| ||||
|
|
|
|
| 1 bA, 2 bA, 3 bA, 4 bA |
| |||||||
12 | 10 | 10 | MENU | F |
|
|
| C |
| Selects Fahrenheit/Celsius Temperature | |||
|
|
|
|
|
|
|
|
|
|
|
| Display | |
13 | 11 | 11 | MENU | Cambiar Filtro (OFF) | Cambiar Filtro On | Selects Filter | |||||||
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| MENU | Cambiar Filtro 200 h | 25 h to 1975 h in | When on, selects time in 25 hour increments | |||||||
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
14 | 12 | 12 | Arrancar |
|
|
|
|
|
|
|
| Returns to Normal Operation |
1.Select Reversing Valve Output (SS/HP switch must be set at HP, omitted if SS/HP switch is SS Position)
–The O/B option is factory set at "O" position. This will accommodate the majority of heat pump applications, which require the changeover relay to be energized in FRIO. If the thermostat you are replacing or the heat pump being installed with this thermostat requires a "B" terminal, to energize the changeover relay in CALOR, the O/B option should be set at "B" position.
2.Program Options 1F80 only – This control can be confi gured for 5/2 day or 5/1/1 day programming or non- programming mode. The default setting is P2, indicating
5/2 day programming. The programs per week can be
toggled to P3 or P0 by pressing the or
keys. A selection of 0 Days for
3.Select Frio Ahorro (Cool Savings™) and value
–Selects the Frio Ahorro feature On or OFF. If selected On, press MENU to select the amount of adjustment for the feature in Frio mode with 1 (1°) being the least amount of adjustment and 6 (6°) being the most amount
of adjustment. Default value is 3 (3°). In normal operation "Ahorro" will appear under "Vent"
Cool Savings is an optional energy saving feature that can reduce your cooling costs. It is based on the principal that lower indoor humidity makes a slightly higher temperature feel more comfortable. Frio Ahorro operates during periods of high demand which normally occur
on the hottest summer days when the cooling system may run for hours to reach the thermostat setting. Long cooling run times also lower the indoor humidity. Frio Ahorro very slowly adjusts the setpoint temperature to make the setpoint closer to the displayed temperature, to a maximum number of degrees selected. Adjusting the setpoint temperature over a long cooling run time allows the system to reach your set temperature and turn off. The room temperature will actually be higher than the thermostat displays, but the reduction in humidity will allow comfort at the slightly higher temperature. When Frio Ahorro is making adjustments, "Save" will show next to the setpoint temperature and the room temperature may vary within the adjustment range selected.
If this feature is selected OFF, no change will occur when the cooling system is continually running during periods of high demand.
4