5.Press DAYSET once. The display will show the
day of the week as an abbreviation (MO for Monday, TU for Tuesday, etc.).
6.Press and hold either TIMEFWD or BACKTIME until you reach the current day of the week.
7.Press PRGMRUN once. The display will show the
correct time and room temperature alter- nately.
Enter Heating Program
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperature display. To resume pro-
gramming after this happens, press PRGMVIEW until
you are at the point where you stopped program- ming. Then you may continue to enter your programs normally. If you want to stop program-
ming at any time, simply press PRGMRUN to resume
program operation.
1. Press | SYSTEM | until HEAT is displayed. |
SWITCH |
2.Press PRGMVIEW once. 5 DAY (indicating weekday
program), and MOR, representing the morn- ing heating period, will appear in the dis- play. Also displayed are the currently pro- grammed start time for the MOR period and the currently programmed temperature.
EXAMPLE:
5 DAY
This display window shows that for the weekday MOR period, the start time is 5:00
22