use the button to move the tempera- ture below the setpoint temperature. See
OPERATING YOUR THERMOSTAT.
!CAUTION
If the outside temperature is below 50°F,
DO NOT use the button to move the temperature below the setpoint tempera- ture. Property damage may result due to compressor slugging.
9.Why doesn’t the temperature change at the time I programmed?
There may be a number of causes for this situation. The following are primary reasons.
•The EMR function is operating. The EMR function will bring on the system automati- cally to bring the temperature to the se- lected level by the beginning of the next
program period. See OPERATING YOUR THERMOSTAT.
•You have programmed the incorrect day or time. Check your programming (be sure that the times you programmed are correct AM or PM times). See PRO-
GRAMMING YOUR THERMOSTAT.
•The thermostat is in the HOLD mode. Press PRGMRUN to start program operation. See
OPERATING YOUR THERMOSTAT.
•The compressor lockout feature is oper- ating; wait about 5 minutes for system to begin running. See OPERATING YOUR THERMOSTAT.
29