2. | Press and hold either | TIME | or | TIME | until |
FWD | BACK | ||||
| you reach the correct minutes. |
|
| ||
3. | SET |
|
|
|
|
Press CLOCK once. The display window will | |||||
| show the hour only. |
|
|
|
|
| EXAMPLE: |
|
|
|
|
4. | Press and hold either | TIME | or | TIME | until |
FWD | BACK |
you reach the correct hour and AM/PM designation (AM begins at midnight; PM begins at noon).
5. Press DAYSET once. The display will show the
day of the week as an abbreviation (MO for Monday, TU for Tuesday, etc.).
6. Press and hold either | TIME | or | TIME | until |
FWD | BACK |
you reach the current day of the week.
7. Press PRGMRUN once. The display will show the correct time and room temperature alter- nately.
Enter Heating Program
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alternating time/temperature display. To re- sume programming after this happens, press
PRGMVIEW until you are at the point where you stopped programming. Then you may continue to enter your programs normally. If you want to stop
programming at any time, simply press PRGMRUN to resume program operation.
22