8a. What time does the last person go to bed at night?
b.What temperature should the house be at this time? These will be your NHT (night) temperature settings.
Now look at the factory preprogrammed times and temperatures shown below. If this program
will suit your needs, simply press PRGMRUN to begin running the factory preset program.
If you want to change the preprogrammed times and temperatures, do the following.
Determine the time periods and heating and cooling temperatures for your weekday pro- gram. You must program 4 periods for each day (MOR, DAY, EVE, and NHT). However, you may use the same heating and cooling tempera- tures for consecutive time periods. You can choose start times, heating temperatures, and cooling temperatures independently for both
Heating Program for ALL days of the Week:
PERIOD | TIME | TEMP |
MOR | 5:00 AM | 70 |
DAY | 9:00 AM | 70 |
EVE | 4:00 PM | 70 |
NHT | 10:00 PM | 64 |
Cooling Program for ALL Days of the Week:
PERIOD | TIME | TEMP |
MOR | 5:00 AM | 78 |
DAY | 9:00 AM | 82 |
EVE | 4:00 PM | 78 |
NHT | 10:00 PM | 78 |
18
