PROGRAMMING
Set Current Time and Date
1)Press Menu and then Time button once. The display will show the hour only.
2)Press and hold either the 
or 
button until you reach the correct hour and AM/PM designation (AM begins at midnight, PM begins at noon).
3)Press Time once again. The display window will show the minutes only.
4)Press and hold either the 
or 
button until you reach the correct minutes.
5)Additional presses of Time will advance the display to
show the year, month and date of month. Press the 
or 
button to change the display to the correct set- ting for each.
6)Press Run to exit the Time mode.
Enter the Heating Program
1)Press SYSTEM button to select “Heat” in the system switch area indicating the active mode being pro- grammed.
2)Press the Menu button and then press Schedule.
3)The top of the display will show the day(s) being pro- grammed. The time and temperature (flashing) are also displayed. “1” will also be displayed to indicate the period.
4)Press 
or 
button to change the temperature to your selected temperature for the 1st heating period.
5)Press Time button, time will flash.
6)Press 
or 
button to adjust the start time for the 1st period.
7)The time will change in 15 minute increments.
8)After you have set the time and the temperature for
the period to begin, press Schedule to advance to the next program period.
9)Repeat steps 2 through 8 until all of the program times and temperatures are set for all program periods on that day.
10)Press Schedule to the next day and repeat steps 2 through 9.
11)When programming is complete and all of the times and temperatures match your desired heating schedule, press Run. The thermostat will now run your program.
Enter the Cooling Program
1)Press SYSTEM button to select “Cool” in the system switch area indicating the active mode being pro- grammed.
2)Follow Enter Heating Program instructions for entering cooling times and temperatures.
Energy Saving ENERGY STAR® Factory Pre-Program
The programmable thermostats are programmed with the energy saving settings shown in the table below for all days of the week. If this program suits your needs, simply set the thermostat clock and press the RUN button. The table below shows the factory set heating and cooling schedule for all days of the week.
| Wake Up | Leave For Work | Return Home | Go To Bed | |||||
| (Period 1) | (Period 2) | (Period 3) | (Period 4) | |||||
|
|
|
|
|
|
|
|
| |
Heating | 6:00 AM | 70°F | 8:00 AM | 62°F | 5:00 PM | 70°F | 10:00 PM | 62°F | |
Program | |||||||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
Cooling | 6:00 AM | 75°F | 8:00 AM | 83°F | 5:00 PM | 75°F | 10:00 PM | 78°F | |
Program | |||||||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
Planning Your Program – Important
The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures.
The thermostat comes configured for 7 day programming and can also be configured for 5/1/1 day programming (see configuration section).
Factory settings are listed on Monday through Friday, Satur- day and Sunday. If you are
If you are
Keep the following guidelines in mind when planning your program.
•In Heating, lower temperatures will save energy.
•In Cooling, higher temperatures will save energy.
•If you plan on using Auto Changeover, do not program the heating higher than the cooling.
9
