White Rodgers 1F95-1280 specifications Programming, Program Override Temporary Override

OPERATING YOUR THERMOSTAT

adjust the temperature.. The HOLD key will appear.. Press the HOLD key.. "Hold At" will appear next to the setpoint tem- perature and the thermostat will maintain the new setpoint temperature until Run Schedule is pressed to resume pro- gram operation..

Program Override (Temporary Override)

Pressorkeys to adjust the temperature.. This will over- ride the temperature setting for a (default) four hour override period.. The override period can be shortened by pressing or lengthened by pressing .. Program Override period can range from 15 minutes to 7 days..

Example: If you turn up the heat during the morning program, it will be automatically lowered later, when the temporary hold period ends.. To cancel the temporary setting at any time and return to the program, press Run Schedule..

If the SYSTEM key is pressed to select AUTO the thermostat will change to Heat or Cool, whichever ran last.. If it switches to heat, but you want cool, or it changes to cool, but you want heat, press both and keys simultaneously to change to the other mode..

PROGRAMMING

Set Current Time and Day

1.Press Menu key to enter installer menu.. Then press Set Time once to indicate hour & AM or PM designation in clock display..

2. Press and hold either the or touch key until you reach the correct hour and AM or PM designation..

3.Press Set Time again to display minutes only in clock display..

4. Press and hold either the	or	touch keys until you
reach the correct minutes..

5. Press Set Time once again to display year..

6. Press either the	or	touch key until you reach the
correct year..

7. Press Set Time once again to display month..

8. Press either the	or	touch key until you reach the
correct month..

9.Press Set Time once again to display date of the month along with day of the week at top row (which is automatic)..

10. Press and hold either the or touch key until you reach the correct day of the month and day of the week displayed at the top row..

11.Press Run Schedule once or twice to remove the key.. Now the display will show the correct time and room tem- perature..

Automatic Daylight Saving Calculation

The Real Time Clock will adjust automatically for daylight sav- ings time, in the following manner:

Increment one hour at 2 AM on the second Sunday of March and decrement one hour at 2 AM on the first Sunday of No- vember.. (New DST effective 2007)..

The daylight saving feature can be enabled or disabled in installer configuration menu.. Default is DS ON (enabled).. After entering installer configuration mode, momentarily press touch key until the display indicates dS (in actual tem- perature digits) and on (default – in clock digits).. and keys will toggle display and operation from on to OFF..

Programming Tip: Copy Program

When programming your thermostat, you may copy the pro- gram from one day to another day or group of days using the Copy key.. In 7 day programming mode, a day can be copied to another day or all six other days.. In 5/1/1 day programming mode the weekday (Mon – Fri) program can be copied into Sat and Sun or either Sat or Sun..

To copy a program from one day to another:

1.In Set Schedule mode, enter the program for the day or select the day you wish to copy by pressing Advance Day..

2.PressCopy.. The display will show “Copy” next to the SYSTEM key and the day of the week that will be copied..

3.PressAdvance Day.. The day being copied will be indi- cated and the other days will be flashing..

4.If you wish to copy to all days skip to next step or press Advance Day until the day you wish to copy to is flashing..

5.PressCopy.. “Copy” will disappear, the day you copied from will disappear and the day(s) you copied to will be on..

6.If you wish to copy this same program into other days, press Copy and repeat steps 3, 4 and 5..

7.PressRun Schedule to return to normal operation..

Fill in the blank schedule on the next page then:

10