F145-1328/F145-1378
Indoor Remote Sensor/Outdoor Remote Sensor
INSTALLATION INSTRUCTIONS
Operator: Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.
INDOOR REMOTE SENSOR | OUTDOOR REMOTE SENSOR |
Outdoor Probe
Interior Mounting Base
NOTE
If in doubt about whether your wiring is millivolt, line, or low voltage, have it inspected by a qualified heating and air conditioning contractor or electrician.
Do not exceed the specification ratings.
All wiring must conform to local and national electrical codes and ordinances.
This control is a precision instrument, and should be handled carefully. Rough handling or distorting components could cause the control to malfunction.
The remote sensors cannot be used with systems where power interruptions are part of normal system operation.
PRECAUTIONS
!CAUTION
To prevent electrical shock and/or equipment dam- age, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.
!WARNING
Do not use on circuits exceeding specified voltage. Higher voltage will damage control and could cause shock or fire hazard.
Do not short out terminals on gas valve or primary control to test. Short or incorrect wiring will damage thermostat and could cause personal injury and/or property damage.
The
Temperature range: 40° to 99°F
SPECIFICATIONS
Operating humidity range: 0 to 90% RH
20 gauge,
The
Temperature range of outdoor probe:
20 gauge,
PART NO. | ||
of Emerson Electric Co. | ||
|
0440 | |
|
