RULES FOR SAFE INSTALLATION AND OPERATION
Please read instructions before installing and using the Elec- tronic Air Cleaner. This will help you obtain the full benefit from the Electronic Air Cleaner you have selected.
▲! WARNING
ELECTROCUTION HAZARD
Shut off power at fuse panel before servicing. Failure to do so could result in serious personal injury or death.
▲! WARNING
Do not attempt installation of this unit unless you are familiar with the necessary tools, equipment, utility connections and potential hazards.
Installation should be performed only by a qualified service provider.
Failure to do so could result in reduced performance of the unit, serious personal injury or death.
1.Read the Owners Manual and the Rules for Safe Operation carefully. Failure to follow these rules and instructions could cause a malfunction of filter or unsatisfactory service.
2.Follow a regular service and maintenance schedule for efficient operation.
3.Unit must run for one full hour after installation. This will allow the collecting cells to reach peak efficiency.
4.If Air Flow Monitor is required, order
▲! WARNING
Installation of this unit must comply with local electric codes or other applicable codes.
Review and understand local codes prior to installation.
Do not use this apparatus in an explosive atmosphere.
Failure to do so could result in serious personal injury or death.
▲! CAUTION
CABINET AND CELLS MAY CONTAIN
SHARP EDGES.
Use care when servicing unit or handl- ing cells. Failure to do so could result in minor personal injury.
TABLE OF CONTENTS |
|
Rules for Safe Installation and Operation | 2 |
How the Air Cleaner Works | 3 |
Construction of the Air Cleaner | 3 |
Preinstallation | 4 |
Installation | 6 |
Wiring Instructions | 7 |
Operation | 8 |
Maintenance and Washing | 8 |
Specifications | 9 |
Basic SST Service Guide | 10 |
Technical Repair Guide | 11 |
Air Cleaner Retrofit (Upgrade) Kit Installation .... | 13 |
Repair Parts | 14 |
Wash Reminder | 16 |
DID YOU GET THE RIGHT SIZE
AIR CLEANER
Model SST1000 is designed for heating or cooling blow- ers delivering 600 to 1200 cubic feet of air per minute (cfm.)
Model SST1400 is designed for heating or cooling blow- ers delivering 1000 to 1600 cfm.
Model SST1600 is designed for heating or cooling blow- ers delivering 1000 to 2000 cfm.
Model SST2000 is designed for heating or cooling blow- ers delivering 1600 to 2200 cfm.
See specifications on page 9.
BASIC TOOLS REQUIRED
Tin Snip
Screwdriver
Rule or Tape Measure
Drill
2
