Whynter ARC-08WB instruction manual Indicator, Function, Buttons, Remote Control

Models: ARC-08WB

1 21
Download 21 pages 21.65 Kb
Page 16
Image 16
REMOTE CONTROL

REMOTE CONTROL

The portable air conditioner can be switched on by the remote control. To transmit signals from the remote control to the air conditioner, point the front part of the remote handset towards the control panel on the air conditioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approximately 8 meters / 26 feet.

NOTE:

Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause interferences

Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control and the air conditioner

Remove the batteries if the remote control is not used for long periods

INSTALLING BATTERIES

Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control

Always change both batteries at the same time

To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly adhere to the polarity signs on the bottom of the battery housing, close the flap once the batteries have been inserted.

 

 

INDICATOR

FUNCTION

1

– Mode Indicator

Displays the current selected mode

(Auto, Cool, Dry or Fan)

 

 

 

2

– Lock Indicator

Indicates unit is on Lock mode

3

– Temp./Timer Display

Displays temperature or timer setting

4

– Fan (High)

Displays the selected high fan speed

5

– Fan (Low)

Displays the selected low fan speed

6

– Timer Indicator

Indicates Timer mode activated

7

– Up Button

Increases set temperature/time

 

 

BUTTONS

FUNCTION

8

– Down Button

Decreases set temperature/time

9

– Mode Button

Controls the 4 function modes:

Auto, Cool, Dry & Fan

 

 

 

10

– On/Off Button

Turns the unit On and Off

11

– Fan Speed Button

Controls the 3 fan speeds: High & Low

or Auto

 

 

 

12

– Sleep Button

Enables Sleep mode

13

– Timer On Button

Enables the On timer & set timer hours

14

– Reset Button

Cancels all settings

15

– Timer Off Button

Enables the Off timer & set timer hours

16

– Lock Button

Locks all settings

17

– LED Display Button

Turns on and off the display light

 

 

 

 

16 P a g e

Page 16
Image 16
Whynter ARC-08WB instruction manual Indicator, Function, Buttons, Remote Control