INSTALLATION INSTRUCTIONS
The air conditioner should be placed on a hard and level surface strong enough to support the unit. The unit has casters and it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects. Never place any obstacles around the air inlet or outlet and allow at least 20 inch of clearance for efficient air- conditioning.
Cool or Auto Mode Dehumidify or Fan Mode
Install Hose Remove Hose
Exhaust Hose Installation
When you use this air conditioner unit, hot air must be exhausted out of the room to complete the air exchange of the condenser. When the unit is operating in Dehumidify or FAN only mode, no exhaust is required. 1. Pull out about 6” of one end of the exhaust hose.
2.Install the flat mouth and sliding round exhaust connector on the exhaust hose by turning counter- clockwise. See Fig. 16 and 17
3.Push in the exhaust hose into the air outlet port at the back of the unit. See Fig. 18
4.Only extend the exhaust hose to the necessary length. We do not recommend extending the exhaust hose more than 8' long. If you are interested in purchasing an additional 4’ exhaust hose please contact info@whynter.com for retail sales information.
NOTES:
The duct can be compressed or extended moderately according to the installation requirement, but it is desirable to keep the exhaust hose length to a minimum.
Do not bend the exhaust hose
Make sure that there are no obstructions around the air outlet of the exhaust hose in order for the exhaust system to work properly
Air filter Installation
Your Whynter portable air conditioner is equipped with a washable
The Activated Carbon filter is designed to remove smoke and other odors. It is recommended you replace the Activated Carbon filter every
WARNING: NEVER OPERATE THE AIR CONDITIONER WITHOUT THE AIR FILTER
Activated Carbon filter
Upper Filer
9 P a g e
