Sun Microsystems SL500 manual Move a Specified Cartridge by Volid

Cartridge Management Tasks

▼Move a Specified Cartridge by VOLID

Use this procedure to move a cartridge with a specified VOLID to a specified location within the library.

Note – This procedure updates the cartridge’s location in the library controller database, but not in the host database. Therefore after performing this procedure, you must perform an audit from the host software to update the host database. Failure to do so will cause future mount requests from the host software to fail.

Caution – Use caution when performing this procedure in partitioned libraries. You could inadvertently move a cartridge from one partition to another, allowing the new partition to overwrite data on the cartridge.

1.Select Tools > Diagnostics, and click the Library folder.

2.Click the RcvrMove tab.

The Recovery Move screen appears.

3. In the Source Location Mode field, click VOLID.

96116 • Revision: KA Chapter 3 SL500 Automated Library Operations 89