Sun Microsystems SL500 manual Set Up Port Control

SNMP Configuration and Usage Tasks

▼Set Up Port Control

Use this procedure to set up SNMP port control.

1.Select Tools > System Detail.

2.Select the Library folder from the device tree.

3.Select SNMP > Port Control.

4.Enter the following information:

■Port—For SL500 tape library. Port 1B is the public access port; other ports are unavailable on this library.

■Command

■Disable—Default. Agent trap requests are sent/received on LAN port:

■Enable—SNMP traps are enabled and the agent responds to gets from the clients.

5.Click Apply.

306 SL500 User’s Guide • July 2008 Revision: KA • 96116