Sun Microsystems SL500 manual Log in to the Local Operator Panel, Click Log on

Local Operator Panel

▼Log in to the Local Operator Panel

Note – Only one user at a time can log in to the local operator panel.

Note – If the touch-screen panel is blank, touch the screen anywhere to activate the Login screen.

1.Use the keypad to enter your login information (see “Enter Data Using the Keypad” on page 33 for detailed instructions).

User ID: SLC_login

Password: password where:

■SLC_login is the SL Console user ID.

■password is the password assigned to this user ID.

Note – The user ID you use determines the screens you can access. See “SL Console Security” on page 28.

2. Click Log on.

34 SL500 User’s Guide • July 2008 Revision: KA • 96116