Sun Microsystems SL500 manual Keypad

Controls and Indicators

Keypad

The keypad is used to:

■Open the door

■Open all CAPs

■Notify you if service is required

Under normal conditions, at power-on, all keypad LEDs are solidly lit. Once library applications begin:

1.All keypad LEDs turn off.

2.The Library Active LED flashes until the audit is complete, then turns off.

3.The Library Active LED turns on at the start of each command, then turns off when each command is completed.

4.The Library Active LED flashes when the library is active.

96116 • Revision: KA Chapter 1 SL500 Introduction 11