Sun Microsystems SL500 manual Sequence Number, Value, Assigned, Module Number, Capacity

Licensing Screen Reference

Sequence Number

Display only.

Unique sequence number assigned to the license key file by Sun Microsystems, Inc.

Note – Sequence numbers 99000 and above are permanently retained and cannot be deleted from the library.

Value

Display only.

Qualification for the feature, if applicable. For example, for the Capacity feature, this field displays the capacity the license provides, such as “FullBase”, “ThirdDEM”, etc. Depending on the feature, the field may be blank or indicate “None”.

Assigned

Display only.

Indicates whether the feature is currently activated on the library. Options are:

■Yes—Feature has been activated

■No—Feature has been installed, but not activated; the library must be rebooted in order for the feature to be activated.

Associated Module Capacity License Detail

Module Number

Display only.

Numeric module ID. Possible values are 1–5.

Capacity

Display only.

Total module capacity that has been licensed for use. Possible values are:

■Full Capacity—All storage cells in the module are licensed for use.

■None—No storage cells in the module have been licensed for use. May also indicate that the module is not installed in the library.

■1/3 Capacity—One-third of the storage cells in the module have been licensed. Applies only to the DEM.

■2/3 Capacity—Two-thirds of the storage cells in the module have been licensed. Applies only to the DEM.

Sequence Number

Display only.

License key file sequence numbers used in providing the indicated capacity. If more than one license key file is involved, the sequence numbers are separated by commas.

000 indicates no license key file has been installed for the module.

nnnCells Licensed Display only.

96116 • Revision: KA Chapter 4 Licensing 131