SL500 Wall Diagrams Specifications | Sun Microsystems specs

A P P E N D I X A

SL500 Wall Diagrams and

This appendix provides the following diagrams and tables:

■“LTO Configurations” on page 332

■“Mixed-Media Configurations” on page 337

■“Specifications” on page 342

Use the legend in TABLE A-1for all diagrams in this appendix.

Note – Your tape management software might conflict with the following information. Refer to your software publication for unique information.

TABLE A-1 Cell Figure Legend

Storage cells available for customer data cartridge

Cells reserved for cleaning and diagnostic cartridges (can be configured for data cartridges)

Cells only available when an expansion module is installed. If this is the lowest module in the rack, these cells are not available.

Array targets

Tape drives

331