Sun Microsystems SL500 manual Sequence screen appears

HandBot Utility Tasks

7.Complete the SOURCE screen as follows. See “Pool Address Range” on page 255 for details.

■In the Selection Mode field, click the appropriate cartridge pool address type.

■In the Minimum Address and Maximum Address fields, select the library internal addresses of the starting and ending locations of the cartridge pool you want to use.

8.Click Next.

The Sequence screen appears.

9.Complete the Sequence screen as follows. See “Move Access Order” on page 255 for details.

■Name of the diagnostic move

■Move Count (specify a number between 1 and 5000)

■Access order (Sequential or Random)

■Move Type (Robot and Cartridge or Robot Only)

■Disable pre move cartridge compatibility check

288 SL500 User’s Guide • July 2008 Revision: KA • 96116