Sun Microsystems manual Revision KA SL500 Introduction

Views and Locations

FIGURE 1-2 Back View of Library Components

1. Base module	4. Standard power supply (see note 1)
2. Drive expansion module	5. Library power switch
3. Cartridge expansion module	6. Tape drive 1 in base unit (see note 2)
4. Redundant power supply (see note 1)	7. Tape drive 1 in expansion module (see note
	3)

Notes

1.If you are ordered only one power supply in a module, it should be installed in the top location.

2.The host firmware sees tape drive 1; the SCSI firmware sees tape drive 0119.

3.The host firmware sees tape drive 1; the SCSI firmware sees tape drive 0219.

96116 • Revision: KA Chapter 1 SL500 Introduction 3