Sun Microsystems SL500 manual Move a Cartridge From a Specified Location

Cartridge Management Tasks

▼Move a Cartridge From a Specified Location

Use this procedure to move a cartridge from one specified location to another within the library.

Note – This procedure updates the cartridge’s location in the library controller database, but not in the host database. Therefore after performing this procedure, you must perform an audit from the host software to update the host database. Failure to do so will cause future mount requests from the host software to fail.

Caution – Use caution when performing this procedure in partitioned libraries. You could inadvertently move a cartridge from one partition to another, allowing the new partition to overwrite data on the cartridge.

1.Select Tools > Diagnostics, and click the Library folder.

2.Click the RcvrMove tab.

The Recovery Move screen appears.

3. In the Source Location Mode field, click Location.

96116 • Revision: KA Chapter 3 SL500 Automated Library Operations 93