Sun Microsystems SL500 manual Power Specifications, Input voltage 100-240 VAC, single phase

Specifications

Power Specifications

The following tables list power specifications for the modules and tape drives.

TABLE A-4 Power for Library Without Tape Drives

Input voltage	100–240 VAC, single phase
Frequency	50/60 Hz
Maximum library power consumption	1.4 A @ 120 V
	0.8 A @ 240 V
Maximum heat output	614	Btu/hr
Voltage-amperes	180	VA
TABLE A-5 Power for Base Unit and Two LTO Tape Drives
	Two LTO Tape Drives
Input power	219	Watts
Input voltage-amperes	226 voltage-amperes
Input current (100 VAC)	2.3 amperes
Input current (120 VAC)	1.9 amperes
Input current (240 VAC)	0.9 amperes
Btu/hour	748	Btu/hr
TABLE A-6 Power for Drive Expansion Module and Four LTO Tape Drives
	Four LTO Tape Drives
Input power	288	Watts
Input voltage-amperes	297 voltage-amperes
Input current (100 VAC)	3.0 amperes
Input current (120 VAC)	2.5 amperes
Input current (240 VAC)	1.2 amperes
Btu/hour	983	Btu/hr

346 SL500 User’s Guide • July 2008 Revision: KA • 96116