Sun Microsystems SL500 manual Eject Cleaning or Diagnostic Cartridges

Drive Cleaning Tasks

▼Eject Cleaning or Diagnostic Cartridges

Use this procedure to eject expired cleaning or diagnostic cartridges through the CAP.

Note – Before beginning this procedure, verify that the CAP cells are empty.

You must use care when ejecting expired cleaning cartridges from the library. If you move an expired cleaning cartridge to a CAP and open the CAP, you must remove the cartridge. If you close the CAP without removing the cleaning cartridge first, the HandBot will re-enter the expired cartridge into the library, and the library controller will reset the usage count to zero.

1.Select Tools > Diagnostics.

2.Expand the CAP Folder, highlight the CAP and then select the Import/Export tab.

3.Do one of the following:

■To export only the expired cleaning or diagnostic cartridges, select the “Export expired cleaning/diagnostic cartridges” option.

■To export all cartridges from the reserved cells that include the cleaning and diagnostic cartridges select the “Export all cleaning/diagnostic cartridges” option.

4.Select the Start button from the upper right corner of the screen.

96116 • Revision: KA Chapter 3 SL500 Automated Library Operations 109