Sun Microsystems SL500 manual Ordering Cartridges and Labels

Ordering Cartridges and Labels

Color cartridges are approved only if the measured reflection density is greater than 0.1 as measured by an X-rite 404G color reflection densitometer. For more information about colored cartridges, contact your Sun support representative.

Color measurements are:

Bandwidth	ANSI Status T Wide band (380 to 780 nm)
Measuring range	Density (0.00 to 2.50) D
Accuracy	±0.02 D
Repeatability	±0.01 D
Aperture diameter	3.4 mm (0.13 in.)

Ordering Cartridges and Labels

Contact your authorized Selling Agent for Sun-branded labeled cartridges. You do not need to order labels separately, because the data cartridges have labels already, and the cleaning and diagnostic labels are shipped with the installation hardware. However, you must select the VOLID range and other label options when ordering cartridges.

If you choose to order additional labels, order them from any standard media vendor. See “Cartridge Requirements” on page 348 before ordering.

96116 • Revision: KA Appendix B Cartridge Information 349